GB/T 3390.3-2013Hand operated socket wrenches -- Driving parts (English PDF)

Foreword

GB/T 3390 "Manual socket wrench," the national standard for the series, is composed of five standard components.

--- GB/T 3390.1 Manual socket wrench socket;

--- GB/T 3390.2 manual transmission mortise and tenon and socket wrenches square hole;

--- GB/T 3390.3 manual transmission accessory socket wrenches;

--- GB/T 3390.4 manual socket wrenches connection accessories;

--- GB/T 3390.5 manual socket wrenches inspection rules, packaging and marking.

This standard GB/T 3390 Item 3.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB/T 3390.3-2004 "manually driven accessory socket wrenches," compared with the GB/T 3390.3-2004, the main Technical requirements changes are as follows.

--- Remove the test torque levels and c-level test torque (3.3,4.4 edition 2004, edition 4.5);

--- Modify the product number (2004 edition Table 1, Table 2, this version of Table 1, Table 2);

--- Modify the labeling of products (2004 version 3.5, this version 3.4);

--- Modify the surface preparation (edition 4.1);

--- Modify and increase the surface quality requirements (2004 version 4.1, this version 4.2).

This standard uses redrafted law revision using ISO 3315:2011 "Assembly tools for screws and nuts with a socket wrench hand drive accessory Dimensions and tests. " this standard and ISO 3315:2011 as compared in structure with more adjustment, listed in Appendix A of this standard and ISO 3315:2011 Reg number compared to the control list.

This standard and ISO 3315:2011 as compared to the existence of technical differences between the terms of these differences has been involved through its outer margin bits Opposing vertical single line (|) were labeled, given a list of corresponding technical differences and their reasons in Appendix B.

This standard also made the following editorial changes.

--- The standard name was changed to "manual transmission accessory socket wrenches." the standard proposed by China National Light Industry Council.

This standard by the National Standardization Technical Committee, hardware tools Hardware Technical Committee (SAC/TC174/SC2) centralized.

1 Scope

This standard specifies the transmission manual socket wrench attachment product classification, technical requirements, test methods, inspection rules, packaging, labeling, transportation Transport and storage.

This standard applies to detachable hexagonal bolts and nuts manually driven accessory socket wrench.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 230.1 metallic materials - Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T standard Feet) (GB/T 230.1-2009, ISO 6508-1:2005, MOD) GB/T 3390.2 manual transmission mortise and tenon and socket wrenches square hole (GB/T 3390.2-2013, ISO 1174-1:2011, MOD) GB/T 3390.5 manual socket wrenches inspection rules, packaging and marking GB/T 4625 Assembly tools for screws and nuts term (GB/T 4625-1998, idt ISO 1703. 1983) GB/T 4955 Metallic coatings - Measurement of coating thickness anodic dissolution coulometry (GB/T 4955-2005, ISO 2177.

2003, IDT)

GB/T 6060.2 Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed (GB/T 6060.2-2006, ISO 2632-1. 1985, MOD) GB/T 6462 and the metal oxide coating thickness - Microscopical method (GB/T 6462-2005, ISO 1463.

2003, IDT)

3 Product Categories