GB/T 33864-2017General specification for mass spectrometer (English PDF)
质谱仪通用规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33864-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 33864-2017 is the English-translated version of 质谱仪通用规范.
GB/T 33864-2017 is the general specification for mass spectrometers, the instruments that ionise a sample, separate the ions by mass-to-charge ratio using electromagnetic fields and measure the ion current.
It fixes the terms and definitions, the classification, the requirements, the test methods and the inspection rules, and the marking, packaging, transport and storage.
It applies to instruments used for qualitative and quantitative analysis by mass spectrometry, but not to leak detectors or other special equipment, and it does not deal with the other instruments or the sample pretreatment devices that may be used with a mass spectrometer.
Its definitions fix mass accuracy, mass range and mass resolution. It cites GB/T 191-2008, GB 4793.1-2007, GB/T 11606-2007, GB/T 13384-2008, GB/T 13966-2013 and GB/T 18268.1-2010. It was issued on 12 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33864-2017
National Standard of the People's Republic of China
- ICS
- 71.040.10
- Classification
- N 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions of the mass spectrometer, classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to the use of mass spectrometry technology for qualitative and quantitative analysis of the instrument.
This standard does not apply to leak detectors and other special equipment.
Note: This standard does not involve the use of other instruments with the mass spectrometer, sample pretreatment devices.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191-2008 packaging and storage icon
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
GB/T 11606-2007 Environmental testing methods for analytical instruments
General specification for analytical instruments
GB/T 13384-2008 General technical requirements for packaging of electromechanical products
GB/T 13966-2013 terminology for analytical instruments
GB/T 18268.1-2010 Electromagnetic compatibility requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
3 Terms and definitions
The definitions and terms defined in GB/T 13966-2013 and the following definitions and terms apply to this document.
3.1 Mass spectrometer
So that the measured material ionization to form different mass-to-charge ratio of ions, the use of electromagnetic principle to ion separation in accordance with the mass ratio and determination of ion current The instrument, usually by the injection system, ion source, mass analyzer, ion detector, vacuum system, electronic measurement and control system and data processing system And other major components.
3.2 Quality accuracy mass accuracy
The mass spectrometer measures the deviation of the mass and the theoretical value of an ion.
3.3 Mass range
The mass spectrometer can determine the range from lowest to highest mass to charge ratio, expressed as "lowest mass ratio to maximum mass to charge ratio".
Note: the mass ratio of the unit is u, also used amu said.
3.4 Mass resolution
The ability of the mass spectrometer to distinguish two adjacent mass peaks.
Note: There are two calculation methods.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 4793.1-2007Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
- GB/T 11606-2007Methods of environmental test for analytical instruments
- GB/T 13384-2008General specifications for packing of mechanical and electrical product
- GB/T 13966-2013Terminology for analytical instruments
- GB/T 18268.1-2010Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
Cited by
- GB/T 48165-2026Method of performance testing for ambient ionization mass spectrometer
- GB/T 43765-2024Space functional coatings - Solderable coatings on particle reinforced metal matrix composites
- HJ 1010-2018Specifications and Test Procedures for Ambient Air Quality Continuous Monitoring System with Gas Chromatography for Volatile Organic Compounds
Similar standards
How to Download GB/T 33864-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB/T 11606-2007 — Methods of environmental test for analytical instruments
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
Secure payment via Stripe
Payments accepted
GB/T 33864-2017
$145.00