Valid

GB/T 33801-2017Ships and marine technology -- Ship recycling management systems -- Requirements for bodies providing audit and certification of ship recycling management (English PDF)

船舶与海上技术 拆船管理体系 对拆船管理审核和认证机构的要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (32 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33801-2017 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Level / Type

National · Recommended

Issue date

May 12, 2017

Implementation date

December 1, 2017

Scope

GB/T 33801-2017 is the English-translated version of 船舶与海上技术 拆船管理体系 对拆船管理审核和认证机构的要求.

GB/T 33801-2017 is the Chinese national standard that sets out what a certification body must satisfy before it can audit and certify ship recycling management systems.

Adopted identically from ISO 30003:2009, it states the principles the body works by, namely impartiality, competence, responsibility, openness, confidentiality and the settlement of complaints, and then the general, structural, resource, information and process requirements, from legal and contractual matters and the safeguarding of impartiality to personnel competence, certification documents, initial audit, surveillance, recertification, special audits, suspension or withdrawal, appeals and complaints.

Its annexes cover audit duration, multi-site organizations, auditor education and experience, and auditor competence. It cites ISO/IEC 17000 and ISO 19011. It was issued on 12 May 2017 and has applied since 1 December 2017.

Found what you need?

Document preview — GB/T 33801-2017

National Standard of the People's Republic of China

ICS
47.020.01
Classification
U 01

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 Principles of certification bodies
  • 4.1 General
  • 4.2 impartiality
  • 4.3 Ability
  • 4.4 Responsibility
  • 4.5 openness
  • 4.6 Confidentiality
  • 4.7 settlement of complaints
  • 5 General requirements
  • 5.1 Legal and contract matters
  • 5.2 impartial management
  • 5.3 Responsibility and financial resources
  • Structural requirements
  • 6.1 Organizational structure and top management
  • 6.2 Commission to maintain impartiality
  • 7 Resource requirements
  • 7.1 Management and Personnel Competence
  • 7.2 Personnel involved in certification activities
  • 7.3 records of personnel
  • 8 Information requirements
  • 8.1 Publicly accessible information
  • 8.2 Certification documents
  • 8.3 Certified customer catalog
  • 8.4 references to certification and the use of signs
  • 8.5 Confidential
  • Information exchange between certification body and its customers
  • Process Requirement
  • 9.1 General requirements applicable to any audit
  • 9.2 Initial Audit and Certification
  • 9.3 Supervisory activities
  • 9.4 Re-certification
  • 9.5 Special audit
  • 9.6 Suspension, withdrawal or reduction of certification scope
  • 9.7 Appeal
  • 9.8 Complaint
  • Record of application organization and customer
  • Requirements for the management of the certification body
  • 10.1 General
  • 10.2 Method 1. Consistent management system requirements with ISO 9001
  • 10.3 Method 2. General management system requirements
  • Appendix A (informative) Guidelines for determining the time for review
  • Appendix B (normative appendices) Auditing guidelines for multi-site organizations
  • Appendix C (normative appendix) Auditor education, work and audit experience, training time
  • Appendix D (normative appendix) Auditor capacity requirements
  • Reference

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the translation method equivalent to ISO 30003:2009 "ship and maritime technology shipbreaking management system for shipbreaking management audit And the requirements of the certification body ".

And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows.

Conformity assessment vocabulary and general principles (ISO/IEC 17000:2004, IDT); GB/T 27000-2006. Guidance on the management system audit (ISO 19011:2011, IDT).

This standard has made the following editorial changes.

--- Corrected printing errors in ISO 30003:2009.

- Change "For example, 7.2.5" in 9.2.2.7 to "For example 7.2.7";

- Replace "see A.1.8" in A.1.4 with "see A.1.9";

- Added note of the provisions (see 4.3, 7.2.3.1, 10.1) for guidance.

1 Scope

This standard specifies the basis of the management system standards and related standards (such as. ISO 30000) for ship recycling management system audit and certification of the original And requirements.

This standard applies to institutions that provide audit and certification of shipbreaking management systems.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

ISO/IEC 17000 Conformity of vocabulary and general principles (Conformity assessment - Vocabulary and general principles)

ISO 19011 Quality and/or Environmental Management System Audit Guidelines (Guidelines for quality and/or environmental management systems auditing)

3 Terms and definitions

ISO/IEC 17000 and the following terms and definitions apply to this document.

3.1 Certification body

Third party conformity assessment body.

Note: see GB/T 27000-2006, definition 2.5.

3.2 Certified customer

Its shipbreaking management system has been qualified third party certification/registration of the organization or organization.

3.3 Management system consulting and/or related operational process assessment

Participate in the design, implementation or maintenance of shipbreaking management system to guide the operation process assessment. Specifically include.

a) planning or preparing manuals or procedures;

b) give specific recommendations, guidance or solutions to the establishment and implementation of the shipbreaking management system;

c) direct internal audit;

d) Evaluate and analyze operational processes.

Note: If the training courses related to the shipbreaking management system and audit are limited to providing general information that is freely available in public places, Training for trainers is not considered as a counsel, that is, the trainer should not propose a solution for a particular company.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.

Referenced standards

Normative references

ISO/IEC 17000 · ISO 19011

How to Download GB/T 33801-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
32 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33801-2017

$535.00