GB/T 33490-2025Basic requirements for exhibition construction service (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

This document replaces GB/T 33490-2017 "Basic Requirements for Exhibition and Display Engineering Services". In addition to structural adjustments and editorial changes, the main The main technical changes are as follows.

The terms and definitions have been changed, and the terms "contractor", "main contractor" and "special decoration contractor" have been deleted, and "exhibition display contractor" has been added.

Engineering Enterprises” (see Chapter 3, Chapter 3 of the 2017 edition);

a) The “basic requirements” are changed to “overall requirements”, which are subdivided into safety production, green environmental protection and forward-looking innovation requirements (see Chapter 4, Chapter 4 of the 2017 edition);

b) Added "Service Capability" (see Chapter 5); c) Change “position requirements” to “service personnel” and subdivide them into management personnel, technical personnel and implementation personnel requirements (see Chapter 6, Chapter 6 of the 2017 edition);

d) Changed "General Principles" to "General Requirements" and changed the requirements (see 7.1, 5.1 of the 2017 edition); e) Changed "preparation" to "planning" and changed the relevant requirements (see 7.2, 5.2 of the 2017 edition); f) Changed the requirements for the service processes such as "design", "production", "construction", "maintenance" and "dismantling" (see 7.3, 7.4, 7.5, 7.7, 7.8, 2017 version 5.3, 5.4, 5.5, 5.6, 5.7);

g) Added service processes such as "acceptance" and "closing" (see 7.6 and 7.9); h) Change “service quality improvement” to “evaluation and improvement” (see Chapter 8, Chapter 7 of the 2017 edition). i) Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed and coordinated by the National Technical Committee for Standardization of Exhibition Industry (SAC/TC 348).

This document was drafted by: Shenzhen Kaston Exhibition Co., Ltd., Beijing Huayi Oriental Exhibition Co., Ltd., Reed Huabo Exhibitions (Shenzhen) Co., Ltd., Xiamen Exhibition Jinhongxin Exhibition Co., Ltd., Beijing Deshibi Image Planning Co., Ltd., China Foreign Trade Center Group Co., Ltd., National Exhibition and Convention Center (Shanghai) Co., Ltd., China Council for the Promotion of International Trade Textile Industry Branch, China Post and Telecommunications Equipment Group Co., Ltd., East Best Lansheng Exhibition Group Co., Ltd., Shanghai International Exhibition (Group) Co., Ltd., Beijing Dianyi Space Exhibition Display Co., Ltd., Great Wall International Exhibition Co., Ltd., and Lingtong Exhibition Systems Co., Ltd.

The main drafters of this document are: Qu Huiping, Zhang Zhou, Li Huarui, An Xiang, Jiang Chengwen, Lai Guoxiang, He Chunsheng, Xu Jiansheng, Wang Chen, Xu Yingxin, Pan Zhen, Zhou Wei, Gu Chunting, Lü Yugui, Peng Lu, Liu Yuguang, Chen Feng, Liang Pengcheng, Wang Lei, Zhang Jianwei, and Wang Yuanbin.

The previous versions of this document and the documents it replaces are as follows.

First published in 2017 as GB/T 33490-2017; - This is the first revision. - Basic requirements for exhibition engineering services

1 Scope

This document specifies the overall requirements, capability requirements, personnel requirements, service process, and evaluation and improvement aspects of exhibition and display engineering services. requirements.

This document is applicable to the standardized management of exhibition display engineering services, and can also be used by exhibition organizers and exhibitors to evaluate and select exhibition display engineering services. Process services.

2 Normative references

GB/T 19012

GB/T 26165-2021

GB/T 41129-2021

3 Terms and definitions

The terms and definitions defined in GB/T 26165-2021 and the following apply to this document.

4 General requirements