GB/T 33467-2016General specification for automatic blowing-filling-capping bloc (English PDF)
全自动吹瓶灌装旋盖一体机通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33467-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33467-2016 is the English-translated version of 全自动吹瓶灌装旋盖一体机通用技术要求.
GB/T 33467-2016 is the Chinese standard "General specification for automatic blowing-filling-capping bloc". Its scope clause reads: This standard specifies the terms and definitions, type, type, basic parameters and working conditions of the fully automatic blow molding machine.
Requirements, test methods, inspection rules, signs, packaging, transportation and storage requirements.
This standard is suitable for the use of two-step bottle system of polyethylene terephthalate (PET) preform for blowing, filling, capping and other exercises (Hereinafter referred to as "blow irrigation machine"), mainly for the use of plastic anti-theft cover sealing PET bottles for the bottle Beverages, condiments and other liquid materials filling. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 33467-2016
National Standard of the People's Republic of China
- ICS
- 55.200
- Classification
- J 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 normative reference documents
1 Scope
This standard specifies the terms and definitions, type, type, basic parameters and working conditions of the fully automatic blow molding machine.
Requirements, test methods, inspection rules, signs, packaging, transportation and storage requirements.
This standard is suitable for the use of two-step bottle system of polyethylene terephthalate (PET) preform for blowing, filling, capping and other exercises (Hereinafter referred to as "blow irrigation machine"), mainly for the use of plastic anti-theft cover sealing PET bottles for the bottle
Beverages, condiments and other liquid materials filling.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
GB 2894 Safety signs and guidelines for their use
GB/T 3766 General rules and safety requirements for hydraulic drive systems and base elements
GB 4208-2008 enclosure protection class (IP code)
Standard for Hygienic Standard for Rubber Products for Food
Mechanical electrical safety machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1-2008
Hygienic standard for drinking water
GB/T 7311 Packaging machinery classification and model preparation method
GB/T 7932 General technical requirements for pneumatic systems
General rules for the use of industrial products GB/T 9969
GB/T 10792-2008 Carbonated beverages (soft drinks)
GB 13113 Hygienic standard for polyethylene terephthalate molded articles for food containers and packaging materials
Compressed air - Part 1. Degree of purification of pollutants GB/T 13277.1-2008
GB/T 13306 signs
General specification for packaging of electromechanical products GB/T 13384
GB/T 14253 General technical requirements for light industrial machinery
GB 14881 National Standard for Food Safety - General Code of Hygienic Practice for Food Production GB/T GB/T 15706 General principles of mechanical safety design Risk assessment and risk reduction
Safety and Health of Food Machinery
GB/T 16855.1 Mechanical safety control systems - Safety components - Part 1. Design general rules
GB/T 17876 packaging containers plastic anti - theft caps
Safety requirements for mechanical safety mechanical design GB 19891
GB 23821 Safety of the machine to prevent the safety distance of the upper and lower limbs from reaching the hazardous area
General specification for plastic bottle washing and filling capping machine GB/T 26995-2011
Fully automatic rotary PET bottle blowing machine GB/T 29648-2013 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33467-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33467-2016
$205.00