GB/T 33427-2016Rubber shoes-Determination of polycyclic aromatic hydrocarbons (English PDF)
胶鞋 多环芳烃含量试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33427-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33427-2016 is the English-translated version of 胶鞋 多环芳烃含量试验方法.
GB/T 33427-2016 is the Chinese standard "Rubber shoes-Determination of polycyclic aromatic hydrocarbons". Its scope clause reads: This standard specifies the determination of 16 polycyclic aromatic hydrocarbons in rubber shoes by gas chromatography-mass spectrometry.
This standard is applicable to the detection of 16 polycyclic aromatic hydrocarbons in rubber materials. Its clauses include principle of the method; reagents and materials; instruments and equipment.
Found what you need?
Document preview — GB/T 33427-2016
National Standard of the People's Republic of China
- ICS
- 61.060
- Classification
- Y 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 principle of the method
- 3 reagents and materials
- 4 instruments and equipment
1 Scope
This standard specifies the determination of 16 polycyclic aromatic hydrocarbons in rubber shoes by gas chromatography-mass spectrometry.
This standard is applicable to the detection of 16 polycyclic aromatic hydrocarbons in rubber materials.
2 principle of the method
Samples with the internal standard and toluene mixed, ultrasonic extraction, if necessary, then by solid phase extraction column purification, concentration, constant volume, with gas chromatography - quality (GC/MSD), and the method was selected by selective ion detection.
3 reagents and materials
3.1
toluene (chromatographic purity).
3.2
n-hexane (chromatographic purity).
3.3
Dichloromethane (chromatographic purity).
3.4 N-Hexane Dichloromethane. N-Hexane and Dichloromethane were prepared in a volume ratio of 1. 1.
3.5 silica gel solid phase extraction column
2g, 6mL or equivalent, before use with n-hexane infiltration.
3.7 needle filter
0.45µm organic filter.
3.9
polycyclic aromatic hydrocarbons mixed standard solution, 100mg/L. accurately weighed the amount of polycyclic aromatic hydrocarbons standard material, with n-hexane configuration to the required concentration
Of the standard solution, you can also buy a commercially available mixed standard solution.
3.10
polycyclic aromatic hydrocarbons mixed standard working solution, 5mg/L. take 0.5mL polycyclic aromatic hydrocarbon mixed standard solution (3.9) dissolved in n-hexane,
To 10 mL.
3.11
polycyclic aromatic hydrocarbons mixed standard working solution, 1mg/L. take 0.1mL polycyclic aromatic hydrocarbon mixed standard solution (3.9) dissolved in n-hexane,
To 10 mL.
3.12
Internal standard.
a) naphthalene D8 standard substance. purity >= 96%;
b) anthracene D10 standard substance. purity >= 96%;
c) 1,3,5-triphenyl benzene standard material. purity >= 96%.
3.13 internal standard solution, 100mg/L
accurately weighed the amount of internal standard with toluene prepared into the required concentration of the internal standard solution.
3.14 internal standard use of liquid, 1mg/L
take 1.0mL internal standard solution (3.13) dissolved in n-hexane, constant volume to 100mL.
3.15 toluene internal standard use of liquid, 100µg/L
0.1mL internal standard solution (3.13) dissolved in toluene, constant volume to 100mL.
4 instruments and equipment
4.1 Gas Chromatography-Mass Spectrometer
EI Source.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33427-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33427-2016
$145.00