GB/T 33384-2016Rubber footwear terminology (English PDF)
胶鞋术语
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33384-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33384-2016 is the English-translated version of 胶鞋术语.
GB/T 33384-2016 sets out the Chinese national terminology for rubber footwear.
Clause 1 states that the standard specifies the terms and definitions for the general concepts, product categories, structural parts, manufacturing processes, performance characteristics and quality defects of rubber shoes, and that it applies to the rubber industry; no exclusion is stated.
The index shows one technical clause, clause 2 terms and definitions, divided into 2.1 General Concepts, 2.2 Product category, 2.3 structural parts, 2.4 manufacturing process, 2.5 Performance characteristics and 2.6 quality defects, followed by a Reference section, an Index and six figures covering the sole decomposition and the section of cloth shoes, the fabric structure and the parts structure of rubber shoes, the component structure of ordinary sports shoes and the parts structure of rubber glue boots.
The entries printed on the page start with the general definition of rubber shoes, built on the sole and the upper, and continue through the product categories, among them cloth shoes, cloth children's shoes, electrical insulating rubber boots, electrical insulation shoes and anti-static rubber boots, each carrying cross-references to the other entries it relies on.
The draft breaks off inside 2.2, so the later subclauses are not shown in text.
The introduction records that the rubber terminology standard was first issued as the national standard GB 9883-1988, was later adjusted into a recommended chemical industry standard numbered HG/T 3083, and that HG/T 3083-1999 was issued on April 20, 1999 and implemented on April 1, 2000 before a further revision, after which the terminology was moved back to a recommended national standard.
The standard was proposed by the China Petroleum and Chemical Industry Association and is administered by the rubber shoes sub-technical committee of the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35/SC9).
The page declares no replaced edition; the standard was issued on December 30, 2016 and has applied since July 1, 2017.
Found what you need?
Document preview — GB/T 33384-2016
National Standard of the People's Republic of China
- ICS
- 61.060
- Classification
- Y 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 terms and definitions
- 2.1 General Concepts
- 2.2 Product category
- 2.3 structural parts
- 2.4 manufacturing process
- 2.5 Performance characteristics
- 2.6 quality defects
- Reference
- Index
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
Rubber terminology standards for the first time in July 4, 1988 as a national standard, the standard number GB 9883-1988, in 1989 May 1 implementation. In 1998 the standard adjusted for the recommended chemical industry standards, standard number adjusted to HG/T 3083, and in 1999 Made the first revision. HG/T 3083-1999 was issued on April 20, 1999 and implemented on April 1, 2000. Year 2009 Was revised on December 4, 2009 and implemented as of June 1, 2010. In order to better embody the terminology of rubber shoes Basic, guiding role, this is the rubber terminus standard re-adjusted to recommend national standards to be developed. Adjusted rubber terminus Standards to take full account of the status of the development of the shoe industry, pay more attention to the concept of rubber system concept system, but also help to understand and exchange.
1 Scope
This standard specifies the general concept of rubber shoes, product categories, structural parts, manufacturing processes, performance characteristics, quality defects in terms and definition.
This standard applies to the rubber industry.
2 Terms and definitions
2.1 General Concepts
2.1.1 Rubber shoes
Sole (2.3.37) With rubber or other elastomer as the main material, the upper (2.3.35) with fabric, rubber and other synthetic or natural materials As the main material made of footwear.
Note: The shoes are usually made of plastic shoes (2.2.10), plastic rubber boots (2.2.11), cloth shoes (2.2.1), rubber shoes (2.2.26) and other footwear species composition. By use one Can be divided into life shoes, sports shoes, labor protective shoes and so on.
2.2 Product category
2.2.1 Cloth shoes
Sole (2.3.37) Rubber or other elastomer as the main material, the upper (2.3.42) to fabric as the main material of the shoes.
2.2.2 Cloth children's shoes
Shoe number below 245, for children wearing fabric shoes (2.2.1).
2.2.3 Electrical insulating rubber boots
Can withstand the specified voltage, suitable for electrical work wear, from the protective effect of plastic rubber boots (2.2.11).
2.2.4 Electrical insulation shoes
Can withstand the specified voltage, suitable for electrical work wear, from the protective effect of shoes (2.1.1).
2.2.5 Cold cold pillistantrubberboot
Shoe body structure and materials are cold and warm role, suitable for cold environment wearing rubber glue boots (2.2.11).
2.2.6 Cold sandals
Shoe body structure and materials are cold and warm role, suitable for wearing cold shoes (2.1.1).
2.2.7 Anti-static rubber boots
Can promptly eliminate the accumulation of body static plastic rubber boots (2.2.11).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33384-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33384-2016
$475.00