GB/T 33269-2016Textiles—Polyester mixtures quantitative analysis—Nuclear magentic resonance spectroscopy method (English PDF)
纺织品 聚酯纤维混合物定量分析 核磁共振法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33269-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33269-2016 is the English-translated version of 纺织品 聚酯纤维混合物定量分析 核磁共振法.
GB/T 33269-2016 is the Chinese standard "Textiles—Polyester mixtures quantitative analysis—Nuclear magentic resonance spectroscopy method".
Its scope clause reads: This standard specifies the use of nuclear magnetic resonance determination of polyethylene terephthalate fiber (PET), polytrimethylene terephthalate fiber (PTT), polybutylene terephthalate fiber (PBT) three different polyester mixture fiber content method.
This standard applies to textiles containing polyester fibers. Its clauses include normative reference documents; principle; instruments and reagents; test steps; results analysis.
Found what you need?
Document preview — GB/T 33269-2016
National Standard of the People's Republic of China
- ICS
- 59.080.01
- Classification
- W 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 principle
- 4 instruments and reagents
- 5 test steps
- 6 Results analysis
1 Scope
This standard specifies the use of nuclear magnetic resonance determination of polyethylene terephthalate fiber (PET), polytrimethylene terephthalate fiber (PTT), polybutylene terephthalate fiber (PBT) three different polyester mixture fiber content method.
This standard applies to textiles containing polyester fibers.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2910 (all parts) Quantitative chemical analysis of textiles
3 principle
The polyester fiber mixture was dissolved by a mixed reagent of deuterated trifluoroacetic acid and deuterated chloroform and subjected to 1H NMR spectroscopy,
The chemical shift and peak area of the 1H absorption peak in different chemical environments were qualitatively and quantitatively analyzed for PET, PTT and PBT.
4 instruments and reagents
4.1 nuclear magnetic resonance spectrometer
not less than 400MHz, with 1H probe.
4.2 Analysis of the balance
accuracy of 0.2mg.
4.3
deuterated chloroform and deuterated trifluoroacetic acid mixed reagent. volume ratio of 5. 1, pure spectrum.
WARNING. This reagent is hazardous to the human body and should be used with adequate protection.
4.4 NMR tubes
5 mm.
5 test steps
5.1
Dissolve and remove non-polyester fibers according to GB/T 2910.
5.2
Take about 15mg (if the sample is not uniform, can increase the amount of sample) polyester fiber samples, with 1mL deuterated chloroform and deuterated trifluoroacetic acid mixed
The reagent (4.3) was sufficiently dissolved at room temperature and transferred to a 5 mm NMR tube (4.4). In 1 h, with nuclear magnetic resonance spectroscopy (4.1)
The 1H spectrum was measured at room temperature. The scanning width was 8000Hz, the number of scans was 64, the relaxation time was 1s and the acquisition time was 5s.
6 Results analysis
6.1 Qualitative analysis
The 1HNMR spectra were analyzed, and the PET, PTT and PBT in the samples were qualitatively determined by the number of absorption peaks and the chemical shift values of the hydrogen atoms […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33269-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33269-2016
$145.00