GB/T 33224-2016Environment impact evaluating method on mechanical refrigerating systems used for cooling and heating (English PDF)
制冷和供热用机械制冷系统环境影响评价方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33224-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33224-2016 is the English-translated version of 制冷和供热用机械制冷系统环境影响评价方法.
GB/T 33224-2016 is the Chinese standard "Environment impact evaluating method on mechanical refrigerating systems used for cooling and heating". Its scope clause reads: This standard specifies the basic principles and frameworks for environmental impact assessment of mechanical refrigeration systems based on life cycle assessment.
The general requirements of the report. This standard applies to the study and application of the life cycle assessment of mechanical refrigeration systems for the evaluation of the full life cycle or designation of mechanical refrigeration systems Stage potential environmental impact. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 33224-2016
National Standard of the People's Republic of China
- ICS
- 27.200
- Classification
- J 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 refrigeration system description
- 5 refrigeration system life cycle evaluation
- 6 Report
- Appendix A (informative) Refrigeration System Inventory Analysis Data Collection Example
- Appendix C (informative) Examples of refrigeration system characterization calculations
- Appendix D (informative) Example of life cycle impact assessment of refrigeration systems
1 Scope
This standard specifies the basic principles and frameworks for environmental impact assessment of mechanical refrigeration systems based on life cycle assessment.
The general requirements of the report.
This standard applies to the study and application of the life cycle assessment of mechanical refrigeration systems for the evaluation of the full life cycle or designation of mechanical refrigeration systems
Stage potential environmental impact.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Comprehensive Emission Standard for Wastewater
GB 16297 Integrated Emission Standard for Air Pollutants
GB/T 24040 Environmental management life cycle assessment principles and framework (GB/T 24040-2008, ISO 14040..2006,
IDT)
GB/T 24044 Environmental Management Life Cycle Assessment Requirements and Guidelines (GB/T 24044-2008, ISO 14044..2006,
IDT)
JB/T 7249 refrigeration equipment terminology
3 terms and definitions
JB/T 7249, GB/T 24040 and GB/T 24044 and the following terms and definitions apply to this document.
3.1 Refrigeration system
By the cooling parts through the internal interconnection to form a closed refrigeration circuit, the refrigerant in this loop in the end of heat absorption and hair heat. It works between two heat sources for cooling (heat) purposes, that is, through the refrigerant from the low heat source to absorb heat and heat to high
Warm source.
3.2 Lifecycle
Refrigeration system from raw material acquisition, to the refrigeration system design, production, packaging, transportation, use, recycling, until the final disposal of the
The whole process.
3.3 Life cycle evaluation lifecycleassessment; LCA
Compilation and evaluation of input, output and potential environmental impacts of the life cycle of the refrigeration system product system.
3.4 Life cycle inventory analysis lifecycleinventoryanalysis; LCI
The stage of the compilation and quantification of the input and output of the refrigeration system throughout the life cycle in the life cycle assessment.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33224-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33224-2016
$355.00