GB/T 32972-2016Technical specification energy saving design for reheating furnace of steel rolling in iron and steel works (English PDF)
钢铁企业轧钢加热炉节能设计技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32972-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
July 1, 2017
Scope
GB/T 32972-2016 is the English-translated version of 钢铁企业轧钢加热炉节能设计技术规范.
GB/T 32972-2016 is the Chinese standard "Technical specification energy saving design for reheating furnace of steel rolling in iron and steel works".
Its scope clause reads: This standard specifies the iron and steel enterprises rolling furnace energy-saving design terms and definitions, energy-saving design principles and energy-saving integrated technology.
This standard applies to continuous rolling furnace. This standard does not apply to intermittent heating furnaces. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32972-2016
National Standard of the People's Republic of China
- ICS
- 77.140.99
- Classification
- H 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 3.1 Thermal efficiency
- 3.2 Preheater waste heat recovery rate
- 3.3 Preheater temperature efficiency
- 3.4 Push steel furnace bottom than skidhearthrate
- 3.5 The strength of the furnace
- 3.6 Heating furnace utilization rate rusting
1 Scope
This standard specifies the iron and steel enterprises rolling furnace energy-saving design terms and definitions, energy-saving design principles and energy-saving integrated technology.
This standard applies to continuous rolling furnace.
This standard does not apply to intermittent heating furnaces.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 3486 Technical guidelines for rational use of heat
General rules for insulation technology of industrial furnaces GB/T Emission standard of air pollutants in rolling steel industry GB 28665
Code for design of industrial furnaces for steel mills
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Thermal efficiency
The amount of heat absorbed by the billet is the percentage of the fuel chemical heat supplied to the furnace and the sum of heat from other heat sources.
3.2 Preheater waste heat recovery rate
Air, gas preheating obtained by the physical heat and into the preheater before the physical heat ratio of flue gas.
3.3 Preheater temperature efficiency
The preheated air (or gas) temperature is reduced by 20 ° C compared to the temperature at which the flue gas enters the preheater by 20 ° C.
3.4 Push steel furnace bottom than skidhearthrate
The ratio of the total area of the bottom pipe to the bottom of the furnace and the bottom of the furnace.
3.5 The strength of the furnace
Per square meter of steel bottom area per hour of production.
3.6 Heating furnace utilization rate rusting
When a plurality of heating furnaces are arranged in a rolling mill, the output of the single-seat heating furnace will be lower than the rated output due to the mutual interference between the charging and discharging materials.
The actual yield to the rated output ratio is called the furnace utilization.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32972-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32972-2016
$85.00