GB/T 32787-2016Technical specification for manganese ferroalloy dust cold-press composite pellet (English PDF)
锰系铁合金粉尘冷压复合球团技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32787-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 14, 2016
Implementation date
May 1, 2017
Scope
GB/T 32787-2016 is the English-translated version of 锰系铁合金粉尘冷压复合球团技术规范.
GB/T 32787-2016 is the Chinese standard "Technical specification for manganese ferroalloy dust cold-press composite pellet".
Its scope clause reads: This standard specifies the applicable conditions, principles and processes, technical requirements, production line layout, and other conditions of manganese-based iron alloy powder cold-pressed composite pellets Related regulations and so on.
This standard applies to manganese iron alloy enterprises, other industries can also refer to use. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32787-2016
National Standard of the People's Republic of China
- ICS
- 77.140.99
- Classification
- H 34
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 3.1 Inside with carbon
- 3.2 Chilled composite pellet
- 3.3 Degree of reducation
- 3.4 Reduction properties
1 Scope
This standard specifies the applicable conditions, principles and processes, technical requirements, production line layout, and other conditions of manganese-based iron alloy powder cold-pressed composite pellets
Related regulations and so on.
This standard applies to manganese iron alloy enterprises, other industries can also refer to use.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 1506 Determination of manganese content of manganese ores Potentiometric titration and ammonium ferrous sulfate titration
GB/T 1515 - Determination of phosphorus content of manganese ores - Phosphorolybdenum blue spectrophotometric method
GB/T 2011 bulk manganese ore sampling, sample preparation method
GB/T 14201 Determination of compressive strength of iron ore pellets
Methods for chemical analysis of manganese ores - Determination of wetted water content GB/T 14949.8
Methods for chemical analysis of manganese ores - Determination of sulfur content GB/T 14949.9
Code for fire protection of building design GB 50016
Specification for general plane design of industrial enterprises GB 50187
Code for design of GB 50491 iron ore pellets
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Inside with carbon
In the ball before the ball with a small amount of anthracite, coke and other carbon powder.
3.2 Chilled composite pellet
Manganese iron alloy smelting smoke, manganese concentrate powder with binder, additives after mixing by mixing machine pressure ball, after drying dry, cold
But to achieve a certain strength, in line with the furnace requirements of the process.
3.3 Degree of reducation
The ratio of the amount of metal to the mass of the metal in the smelting reduction reaction in the furnace.
3.4 Reduction properties
The volume expansion of the pellets in the furnace and the strength of the pellets after reduction. General requirements of the furnace pellet reduction of 60%, after the reduction of residual
The anti-cold compressive strength is not less than the specified value.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32787-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32787-2016
$135.00