GB/T 32698-2016Rubber compounding ingredients - Determination of particle size distribution for silica, precipitated, hydrated - Laser diffraction (English PDF)
橡胶配合剂 沉淀水合二氧化硅粒度分布的测定 激光衍射法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32698-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 14, 2016
Implementation date
January 1, 2017
Scope
GB/T 32698-2016 is the English-translated version of 橡胶配合剂 沉淀水合二氧化硅粒度分布的测定 激光衍射法.
GB/T 32698-2016 is the Chinese standard "Rubber compounding ingredients - Determination of particle size distribution for silica, precipitated, hydrated - Laser diffraction".
Its scope clause reads: This standard specifies a method for the determination of particle size distribution for silica, precipitated, hydrated, by laser diffraction.
This standard is applicable to silica, precipitated, hydrated, for rubber compounding ingredients. The particle size range is 0.1 µm to 300 µm.
Note: Since the optical model used in the laser diffraction method to determine the particle size distribution is set as spherical particle size, the particle size distribution of non-spherical particle size is equivalent to that of spherical particle size.
The results of the associated particle size distribution may be different from those determined by other physical principles (e.g., sedimentation, sieving). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32698-2016
National Standard of the People's Republic of China
- ICS
- 83.040.20
- Classification
- G 49
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword II
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Principle
- 5 Reagents
- 6 Apparatus
- 7 Sampling
- 8 Sampling Method and Disperse Medium
- 9 Test Conditions
- 10 Instrument Calibration
- 11 Procedures
- 12 Repeatability
- 13 Expression of Results
- 14 Test Report
1 Scope
This standard specifies a method for the determination of particle size distribution for silica, precipitated, hydrated, by laser diffraction.
This standard is applicable to silica, precipitated, hydrated, for rubber compounding ingredients. The particle size range is 0.1 µm to 300 µm.
Note: Since the optical model used in the laser diffraction method to determine the particle size distribution is set as spherical particle size, the particle size distribution of non-spherical particle size is equivalent to that of spherical particle size. The results of the associated particle size distribution may be different from those determined by other physical principles (e.g., sedimentation, sieving).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6003.1 Test Sieves - Technical Requirements and Testing - Part 1: Test Sieves of Metal Wire Cloth
GB/T 8170 Rules of Rounding Off for Numerical Values & Expression and Judgment of Limiting Values
GB/T 15445.1 Representation of Results of Particle Size Analysis - Part 1: Graphical Representation
GB/T 19077.1 Particle Size Analysis - Laser Diffraction Method - Part 1: General Principles
HG/T 3061 Rubber Compounding Ingredients - Silica Precipitated Hydrated
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 19077.1 and the following apply.
3.1 silica, precipitated, hydrated
material in the form of amorphous particles precipitated from an aqueous solution of soluble silicate
3.2 obscuration
ratio of the cross-sectional area of the incident (excited) beam blocked (partially) by the measured sample particle to the total cross-sectional area of the incident (excited) beam
3.3 volume distribution
particle size distribution based on particle volume. It is expressed as the percentage of the volume of particles in a certain size to the total volume of all particles
3.4 diameter add up 10%
D10 particle size, in microns (µm), of the sample when the cumulative percentage of laser particle size distribution reaches 10%
3.5 median diameter
D50 particle size, in microns (µm), of the sample when the cumulative percentage of laser particle size distribution reaches 50%
3.6 diameter add up 90%
D90 particle size, in microns (µm), of the sample when the cumulative percentage of laser particle size distribution reaches 90% […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32698-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32698-2016
$115.00