GB/T 32677-2016Determination of inorganic sulphites in toothpaste (English PDF)
牙膏中无机亚硫酸盐的检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32677-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32677-2016 is the English-translated version of 牙膏中无机亚硫酸盐的检测方法.
GB/T 32677-2016 is the Chinese standard "Determination of inorganic sulphites in toothpaste". Its scope clause reads: This standard specifies the method for the determination of inorganic sulfite in toothpaste by ion chromatography.
This standard applies to the determination of soluble inorganic sulfite in toothpaste. Its clauses include normative reference documents; principle; reagent.
Found what you need?
Document preview — GB/T 32677-2016
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- Y 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 principle
- 4 reagent
1 Scope
This standard specifies the method for the determination of inorganic sulfite in toothpaste by ion chromatography.
This standard applies to the determination of soluble inorganic sulfite in toothpaste.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Preparation of standard titration solution for GB/T 601 chemical reagents
GB/T 6682 Chemical laboratory water specifications and test methods
3 principle
The inorganic sulphite in the sample was extracted with sodium hydroxide solution, centrifuged and purified, and then separated by anion exchange column.
Detector detection. To qualify the retention time, external standard method.
4 reagent
4.1
Unless otherwise specified, the test water is the primary water specified in GB/T 6682 and its resistivity is greater than or equal to 18.2 Mohm · cm.
4.2 sodium sulfite standard (sodiumsulfite, molecular formula
Na2SO3, CASNo. 7757-83-7). purity to be corrected, the correction side
See Appendix A.
4.3 anhydrous sodium carbonate
excellent grade pure.
4.4 sodium bicarbonate
excellent grade pure.
4.5 sodium hydroxide
excellent grade pure.
4.6 Methanol
Chromatographic Purification.
4.7 Acetone
Chromatographic pure.
4.8 Formaldehyde solution
37.0% ~ 40.0%, analytical grade.
4.9 carbonate eluent
Weigh 0.3392g anhydrous sodium carbonate (4.3) and 0.0840g sodium bicarbonate (4.4), respectively, in a 1L volumetric flask, add
Appropriate amount of water dissolved after adding 120mL acetone (4.7), then add water volume.
4.10 sodium hydroxide solution c (NaOH) = 100mmol/L
Weigh 4.000g sodium hydroxide (4.5), add water to 1L, mix. Can also make
Prepared with automatic eluent generator OH-type.
4.11
extract (10mmol/L sodium hydroxide solution, which contains a volume fraction of 0.01% formaldehyde). Weigh 0.40g sodium hydroxide (4.5), dissolved in the appropriate amount, add 0.1mL formaldehyde solution (4.8), then diluted with water to 1L.
4.12 sodium sulfite standard stock solution
accurately weighed 196.9mg sodium sulfite (4.2), placed in 100mL volumetric flask, add appropriate amount of water
So that dissolved, immediately add 1mL formaldehyde solution (4.8), and diluted with water to the mark, shake.
Note. The standard sodium sulfite standard stock solution concentration of sulfur dioxide, the concentration of 1000µg/mL.
4.13 sodium sulfite standard working fluid
accurate removal of 5.00mL sodium sulfite standard stock solution (4.12) to 100mL volumetric flask, with water […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32677-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32677-2016
$115.00