GB/T 32653-2016Microelectro mechanical system acceleration geophone (English PDF)
微机械系统加速度检波器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32653-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
May 1, 2017
Scope
GB/T 32653-2016 is the English-translated version of 微机械系统加速度检波器.
GB/T 32653-2016 is the Chinese standard "Microelectro mechanical system acceleration geophone". Its scope clause reads: This standard specifies the terminology and definitions, marking, requirements, test methods, inspection rules, marking, and package for micro-mechanical system acceleration detectors Equipment, transportation, storage.
This standard is applicable to the micro-mechanical system acceleration detector for seismic exploration. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32653-2016
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- N 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 mark
- 5 request
- 5.1 Appearance
- 5.2 Environmental Adaptability
- 5.3 single component MEMS acceleration detector technical parameters
- 5.4 Three component MEMS acceleration detector technical parameters
- 6 Test method
- 6.1 Test conditions
- 6.2 Visual inspection
- 6.3 Environmental Adaptability Test
- 6.4 Single component MEMS acceleration detector technical parameter test
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Type Inspection
- 8 mark, packaging, transportation, storage
- 8.1 mark
- 8.2 Packaging
- 8.3 Transport
- 8.4 Storage
1 Scope
This standard specifies the terminology and definitions, marking, requirements, test methods, inspection rules, marking, and package for micro-mechanical system acceleration detectors
Equipment, transportation, storage.
This standard is applicable to the micro-mechanical system acceleration detector for seismic exploration.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
GB/T 2829-2002 Periodic inspection count Sampling procedures and tables (for inspection of process stability)
GB/T 6587-2012 General specification for electronic measuring instruments
3 terms and definitions
The following terms and definitions apply to this document.
3.1 MEMS Acceleration Detector
A seismic sensor consisting of a microelectromechanical system capable of detecting vibration acceleration.
3.2 Three - component MEMS Acceleration Detector MEMSthreecomponentsaccelerationgeophone
Consists of three MEMS acceleration detector core, can accept the same physical point on three different directions of vibration acceleration of the earthquake transmission
Sensor.
3.3 Sensitivity temperature coefficient
The relative change of the sensitivity of the MEMS acceleration detector with the unit temperature under full - scale condition.
3.4 Output drift
When the acceleration is zero, the output of the MEMS acceleration detector.
3.5 Output drift temperature coefficient
Changes in output drift of MEMS accelerometer detectors due to changes in unit temperature.
3.6 Distortion
A specific frequency of the standard sine wave, with a specified speed to drive the MEMS acceleration detector, MEMS acceleration detector output signal
The percentage of the ratio of the rms value of the harmonic component to the rms value of the fundamental component.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32653-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32653-2016
$255.00