GB/T 32528-2016Printing machinery—hard-cover book binding line (English PDF)
印刷机械 精装书籍联动线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32528-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 32528-2016 is the English-translated version of 印刷机械 精装书籍联动线.
GB/T 32528-2016 is the Chinese standard "Printing machinery—hard-cover book binding line".
Its scope clause reads: This standard specifies the terms and definitions of the hardcore book linkage line (hereinafter referred to as the linkage line), the type and the basic parameters, requirements, inspection methods, Inspection rules, signs, packaging, transportation and storage.
This standard applies to the automatic continuous completion of the book core conveyor, book core flattening, book back brush, drying, pressure flat, three cut, polished round, from the ridge, paste (See Appendix A), also applies to the automatic continuous completion of the ridge from the ridge, paste, and so on.
Back, on the book shell, pressure groove forming and finished product collection process linkage line. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32528-2016
National Standard of the People's Republic of China
- ICS
- 37.100.10
- Classification
- J 87
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 type, basic parameters, model and name
- 4.1 Type
- 4.2 Basic parameters
- 4.3 Model and name
- 5 requirements
- 5.1 Consolidated requirements
- 5.2 Assembly quality
- 5.3 Noise requirements
- 5.4 Security
- 5.5 Control system
- 5.6 Electrical quality
- 5.7 finished book quality
- 5.8 Appearance quality
- 5.9 manual and product certification
- 6.1 Air run test
- 6.2 Assembly quality inspection
- 6.3 Noise measurement
- 6.4 Quality inspection of finished product
- 6.5 Safety Inspection
- 6.6 Electrical Quality Inspection
- 6.7 Appearance Quality Inspection
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Type test
- 8.1 Mark
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- Appendix A (informative appendix) hardcover line processing book process
- Appendix B (informative) hardcover book structure diagram
1 Scope
This standard specifies the terms and definitions of the hardcore book linkage line (hereinafter referred to as the linkage line), the type and the basic parameters, requirements, inspection methods,
Inspection rules, signs, packaging, transportation and storage.
This standard applies to the automatic continuous completion of the book core conveyor, book core flattening, book back brush, drying, pressure flat, three cut, polished round, from the ridge, paste (See Appendix A), also applies to the automatic continuous completion of the ridge from the ridge, paste, and so on.
Back, on the book shell, pressure groove forming and finished product collection process linkage line.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
GB 2894 Safety signs and guidelines for their use
Anti - rust packaging GB/T 4879
Mechanical electrical safety machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1-2008
GB/T 6388 shipping package collection and delivery mark
Glossary of terms used in printing technology - Part 7. Post - processing terminology GB/T 9851.7-2008
General rules for the use of industrial products GB/T 9969
GB/T 13306 signs
General specification for packaging of electromechanical products GB/T 13384
General rules for industrial product assurance documents GB/T Mechanical electrical safety instructions, marking and operation - Part 2. Marking requirements GB 18209.2
Industrial machinery - Electrical equipment - Protective earthing circuit continuity test specification GB/T 24342-2009
GB/T 28387.1-2012 Design and structural safety rules for printing machinery and paper processing machinery - Part 1. General requirements
GB/T 28387.4-2012 Design and structural safety rules for printing machinery and paper processing machinery - Part 4. Book binding, paper
Processing and finishing machinery
GB/T 30325-2013 hardcover book requirements
GB/T 30326-2013 Paperback book requirements
Manufacture and naming of JB/T 3090 printing machinery products
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Hardcover
Book core set by the Union, cutting, modeling, with cardboard or soft material for the book shell, the surface decoration and durable, resistant to save a book
Bookbinding method.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32528-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32528-2016
$225.00