GB/T 32396-2015Information technology—Telecommunications and information exchange between systems—Wireless high-rate ultra wideband PHY specification based on single-carrier (English PDF)
信息技术 系统间远程通信和信息交换 基于单载波无线高速率超宽带(SC-UWB)物理层规范
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32396-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
January 1, 2017
Scope
GB/T 32396-2015 is the English-translated version of 信息技术 系统间远程通信和信息交换 基于单载波无线高速率超宽带(SC-UWB)物理层规范.
GB/T 32396-2015 is the Chinese standard "Information technology—Telecommunications and information exchange between systems—Wireless high-rate ultra wideband PHY specification based on single-carrier".
Its scope clause reads: This standard specifies the use of a single carrier direct spread spectrum technology based on ultra-wideband 6GHz ~ 9GHz band physical layer specification, including the physical layer General description of the physical layer channelization is described, the PLCP sublayer, the transmitter and receiver parameters and other parameters of the request signal.
This standard applies to single-carrier ultra wideband transmission systems design, development and integration. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32396-2015
National Standard of the People's Republic of China
- ICS
- 35.100
- Classification
- L 78
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 Symbol Formula
- 6 General description of the physical layer
- 6.1 Overview
- 6.2 PHY characteristics
- 6.3 PHY frame structure
- 7 PHY division
- 7.1 Overview
- 7.2 PHY function
- 7.3 PLCP sublayer
- 7.4 PMD sublayer
- 7.5 PLME
- 9 PLCP sublayer
- 9.1 Overview
- 9.2 PPDU
- 9.3 PLCP Preamble
- 9.4 Training sequence
- 9.5 PLCP header
- 9.6 PSDU
- 9.7 Data scrambler
- 9.8 convolutional encoder
- 9.9 LDPC encoder
- 9.10 constellation mapping
- 9.11 spread spectrum modulation
- 10 operating frequency and time parameters
- 10.1 Operating Frequency
- 10.2 PHY time parameter
- 11 Transmitter parameters Requirements
- 11.1 transmit PSD template
- 11.2 transmit center frequency tolerance of
- 11.3 symbol clock frequency tolerance
- 11.4 Clock Synchronization
- 11.5 phase coherent
- 11.6 transmit power control
- 11.7 transmitter constellation error relative to the machine
- 12 receiver parameters to claim
- 12.1 sensitivity receiver
- 12.2 The receiver CCA performance
- 12.3 Link Quality Indicator
1 Scope
This standard specifies the use of a single carrier direct spread spectrum technology based on ultra-wideband 6GHz ~ 9GHz band physical layer specification, including the physical layer
General description of the physical layer channelization is described, the PLCP sublayer, the transmitter and receiver parameters and other parameters of the request signal.
This standard applies to single-carrier ultra wideband transmission systems design, development and integration.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 26229-2010 Information technology - Telecommunications and information exchange between wireless high speed ultra-wideband MAC And physical layer specifications (ISO /IEC 26907.2007, MOD)
GB/T 26230-2010 Information technology - Telecommunications and information exchange between wireless high speed ultra-wideband MAC And physical layer interface specification (ISO /IEC 26908.2007, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Capture acquisition
Forcing the receiver process local spreading sequence with the received spreading sequence synchronized.
3.2 Adaptive training
Adaptive mechanisms to tap coefficient adjustment process to the appropriate value.
3.3 Anti-aliasing filter
Suppression frequency is greater than the sampling rate of the signal analog low-pass filter.
Note. This type of filter does not appear the spectral aliasing.
3.4 Rate coderate
Data bits prior to coding and coded ratio.
3.5 Frame payload frameload
The device transmits the data frame portion of the valid data.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32396-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32396-2015
$415.00