GB/T 32352-2015Standard of acceptance for wind turbine generator systems used on plateau (English PDF)
高原用风力发电机组现场验收规范
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32352-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32352-2015 is the English-translated version of 高原用风力发电机组现场验收规范.
GB/T 32352-2015 is the Chinese standard "Standard of acceptance for wind turbine generator systems used on plateau". Its scope clause reads: This standard specifies a plateau with the wind turbine (hereinafter referred to as "units") and the general content requirements in the field of inspection.
This standard applies to an altitude of 1000m to 5000m above and below the horizontal axis of the production has been established and grid units, other classes Type units can be performed with reference to this standard. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32352-2015
National Standard of the People's Republic of China
- ICS
- 09.020
- Classification
- K 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 5 Acceptance Preparation
- 6 start-up acceptance
- 8 9 acceptance rectification
- 9 confirm acceptance
- Appendix A (informative) Guidance acceptance list tool
- Annex B (informative) availability assessment methods
- Annex C (informative) power curve assessment methods
- Annex D (informative) Units acceptance report
- References
1 Scope
This standard specifies a plateau with the wind turbine (hereinafter referred to as "units") and the general content requirements in the field of inspection.
This standard applies to an altitude of 1000m to 5000m above and below the horizontal axis of the production has been established and grid units, other classes
Type units can be performed with reference to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2900.53 Electrotechnical terminology Wind Turbine
GB/T 4942.1 overall structure of the rotary motor protection (IP code) rating
GB/T 20319 wind turbine acceptance
GB /Z25427 wind turbine lightning protection
GB/T 31140 altitude wind power generation equipment with the technical requirements of the environment
DL/T 666 wind farms operating procedures
DL/T 796 wind farm safety rules
3 Terms and Definitions
GB/T 2900.53 define the following terms and definitions apply to this document.
3.1 Commissioning test run
After the installation is completed the unit, before the official full operation, running through a period of testing, the detection unit of overall performance of the process.
In this process, the unit continuous, stable, trouble-free operation some time.
3.2 Quality assurance of warrantyperiod
After commissioning the unit, equipment suppliers take relevant measures to ensure the normal and stable operation of the unit and eliminate the defect responsible for the unit to ensure that
Units meet the design and quality requirements for some time.
3.3 Installation and acceptance
Unit after installation is complete, the unit is installed and the installation of quality-related inspections.
3.4 Commissioning acceptance
Unit fully operational before the official check the work of the unit related equipment and components, and verify whether the design of the plant unit operation
Performance and quality inspection.
3.5 Quality assurance of acceptance
Quality assurance unit before the expiration of the warranty period of the unit for maintenance, repair, unit performance and quality inspection.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32352-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32352-2015
$285.00