GB/T 32282-2015Test method for disoclation density of GaN single crystal—Cathodoluminescence spectroscopy (English PDF)
氮化镓单晶位错密度的测量 阴极荧光显微镜法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32282-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
November 1, 2016
Scope
GB/T 32282-2015 is the English-translated version of 氮化镓单晶位错密度的测量 阴极荧光显微镜法.
GB/T 32282-2015 is the Chinese standard "Test method for disoclation density of GaN single crystal—Cathodoluminescence spectroscopy". Its scope clause reads: This standard specifies the method of cathode fluorescence microscopy test gallium nitride single crystal dislocation density.
This standard applies to the dislocation density gallium nitride single crystal Ge 1 × 103/cm2 ~ 5 × 108/cm2 or between dislocation density test. Its clauses include terms and definitions; method summary.
Found what you need?
Document preview — GB/T 32282-2015
National Standard of the People's Republic of China
- ICS
- 77.040
- Classification
- H 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Method summary
1 Scope
This standard specifies the method of cathode fluorescence microscopy test gallium nitride single crystal dislocation density.
This standard applies to the dislocation density gallium nitride single crystal Ge 1 × 103/cm2 ~ 5 × 108/cm2 or between dislocation density test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including with amendments) apply to this document.
GB/T 1554 crystallographic perfection of silicon by preferential etch test methods
GB/T 14264 semiconductor material terms
GB/T 27788 micro-beam analysis SEM image magnification calibration Guidelines
3 Terms and Definitions
GB/T 14264 and defined by the following terms and definitions apply to this document.
3.1 Cathode fluorescent
Luminescence material produces a physical phenomenon in a cathode ray (electron beam) excitation.
3.2 Radiative recombination
Electrons from high energy state to a lower energy state transition process, the released electrons and holes recombine certain energy, energy in the form of photons freed.
3.3 Non-radiative recombination
Electrons from high energy state to a lower energy state transition process, the released electrons and holes recombine certain amount of energy to remove energy photon radiation
Other forms of external release.
4 Method summary
Typically, the luminescent material samples tested under the electron beam, a variety of signals will be excited, such as a secondary electron signals, backscattered electron signal
No, X-ray signal, cathode fluorescent signals. The use of specific detectors respectively receive said signals, can be reflected in the sample phase
It should feature images. Cathode fluorescent signal mainly photomultiplier tubes to detect the light signals into electric current, and finally to the image output.
Cathode fluorescent contrast images reflect the different regions of the sample luminescence strength.
Dislocation gallium nitride single crystal is usually non-radiative recombination centers, and therefore the performance of dark spots on the cathode fluorescent image, a cathode fluorescence microscopy
Space mirror up to several tens of nanometers resolution, it is possible to detect a gallium nitride single crystal dislocation density without destroying the sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32282-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32282-2015
$135.00