GB/T 32247-2015Ferritic ductile iron castings suitable for low temperature service (English PDF)
低温铁素体球墨铸铁件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32247-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 32247-2015 is the English-translated version of 低温铁素体球墨铸铁件.
GB/T 32247-2015 is the Chinese standard "Ferritic ductile iron castings suitable for low temperature service".
Its scope clause reads: This standard specifies the temperature in the production method of ferritic ductile iron -40 °C ~ -60 °C, the chemical composition and heat treatment, Technical requirements, sampling, test methods, inspection rules, inspection and other castings, quality records, marking and quality certification, rust, packaging, transport And storage requirements.
This standard applies to sand or sand equivalent thermal conductivity and other low-temperature mold casting ferritic ductile iron, other casting methods Production of low-temperature ferritic ductile iron can refer to use.
Its clauses include production methods, chemical composition and heat treatment.
Found what you need?
Document preview — GB/T 32247-2015
National Standard of the People's Republic of China
- ICS
- 77.140.80
- Classification
- J 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the temperature in the production method of ferritic ductile iron -40 °C ~ -60 °C, the chemical composition and heat treatment,
Technical requirements, sampling, test methods, inspection rules, inspection and other castings, quality records, marking and quality certification, rust, packaging, transport
And storage requirements.
This standard applies to sand or sand equivalent thermal conductivity and other low-temperature mold casting ferritic ductile iron, other casting methods
Production of low-temperature ferritic ductile iron can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
RT Test Method. Test Part 1 GB/T 228.1 metallic materials tensile
GB/T 229 metal Charpy pendulum impact test method
GB/T 231.1 metallic materials Brinell hardness test - Part 1. Test methods
GB/T 1348 Ductile Iron
GB/T 5677 Steel Castings radiographic testing
GB/T 6060.1 Roughness comparison specimens - Cast surfaces
GB/T 6414 casting dimensional tolerances and machining allowances
GB/T 9441 ductile iron metallography
GB/T 9444 steel castings - Magnetic particle testing
GB/T 11351 casting weight tolerance
GB/T 18851.1 destructive testing - Penetrant testing - Part 1. General
3 production methods, chemical composition and heat treatment
3.1
cryogenic method for producing ferritic ductile iron, chemical composition and heat treatment process, the supplier may decide, but should meet this standard
Mechanical properties required targets. Chemical composition is not cast as a basis for acceptance.
3.2
When the demand side, the chemical composition of the casting, heat treatment methods have special requirements agreed to by both parties.
4. Technical Requirements
Grades and Mechanical Properties of Materials 4.1
Table 4.1.1 cryogenic material grades ferritic Ductile Iron 1 to Table 4.
4.1.2
QT350-22L, QT400-18L single-cast specimens mechanical properties are shown in Table 1.
4.1.3
QT350-22L, impact QT400-18L single-cast sample absorb energy in Table 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32247-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32247-2015
$145.00