GB/T 32229-2015Road test methods for all-terrain vehicles (English PDF)

3.1 Preparation before trial

3.1.1 Check and adjust by commission

3.1.1.1

The test vehicle must be accompanied by a maintenance manual or related technical documentation.

3.1.1.2

Check the name, trademark, model, vehicle identification code, engine number and date of manufacture of the test vehicle manufacturer and record.

3.1.1.3

Check the assembly of the assembly, parts, accessories, assembly quality and integrity of the exposed parts are visible damage, the vehicle tool is

No complete According to the use of maintenance instructions or the provisions of the relevant technical documents to check the tightening of important fasteners, the lubrication point of the lubricating oil (Fat) filling and sealing conditions, the electrical system can work properly, the operating system and the braking system can work properly.

3.1.1.4

It is permissible to adjust the test vehicle in accordance with the maintenance instructions or the relevant technical documentation to make it in a normal technical condition.

3.1.2 by the test run away

3.1.2.1

The test vehicle shall be carried out on a flat road with a relatively small slope in accordance with the maintenance instructions or the relevant technical documents.

3.1.2.2

During the period of operation should always check the various parts of the vehicle tightening and working conditions, timely adjustment, troubleshooting, and detailed records

Barrier situation. The distance is.200km. If the production enterprises have to go with the standard, according to corporate norms to go together.

3.1.2.3

The details of the walking process are recorded in Table A.1 as specified in Appendix A.

3.1.2.4

After maintenance, follow the maintenance manual.

3.1.3 size and quality of the test

If necessary, you can measure the size and quality of the test vehicle according to GB/T 5373 before the performance test.

3.2 General test conditions

3.2.1 commissioned

3.2.1.1

The fuel and lubricating oil grades and mixing ratios used in the test vehicle shall comply with the provisions of the technical documentation of the vehicle (if necessary, […]