GB/T 32203-2015Functional safety for safety instumented system in oil and gas pipelines—Acceptance code (English PDF)
油气管道安全仪表系统的功能安全 验收规范
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32203-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 32203-2015 is the English-translated version of 油气管道安全仪表系统的功能安全 验收规范.
GB/T 32203-2015 is the Chinese standard "Functional safety for safety instumented system in oil and gas pipelines—Acceptance code".
Its scope clause reads: This standard specifies the functional safety inspection personnel of oil and gas pipeline safety instrumented system requirements, the implementation phase of functional safety inspection activities, inspection Management responsibilities and income-generating activities, the activities of the various stages of acceptance in accordance with the content and requirements.
This standard applies to the acceptance of new and expansion of onshore oil and natural gas long-distance pipeline system safety instrumented system. Its clauses include acronyms, terms and definitions.
Found what you need?
Document preview — GB/T 32203-2015
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 acronyms, terminology and definitions
- 3.1 Abbreviations
- 3.2 Terms and Definitions
- 4 3 General requirements
- 4.1 Objective
- 4.2 Acceptance Phase
- 4.3 Acceptance Requirements
- 5 SIS design review
- 5.1 Objective
- 5.2 based on 6 review
- 5.3 Review of contents
- 5.4 8 review
- 6.1 Objective
- 6.2 basis for acceptance
- 6.3 Acceptance Content
- 7 9 Site Acceptance
- 7.1 Objective
- 7.2 basis for acceptance
- 7.3 Acceptance contents
- 7.4 Acceptance report
- 8 before starting 10 Safety Review
- 8.1 Objective
- 8.2 basis for acceptance
- 10 8.3 Acceptance Content
- 11 8.4 Acceptance report
- 9 completion and acceptance
- Appendix A (informative) does not meet the 12 records
- Annex B (informative) 13 Factory Acceptance Test
- Annex C (informative) Acceptance Certificate
- Annex D (informative) Site Acceptance Test
- Annex E (informative) safety review before starting the Acceptance Certificate
- References
- 1 oil and gas pipeline safety instrumented system lifecycle and critical acceptance activities
1 Scope
This standard specifies the functional safety inspection personnel of oil and gas pipeline safety instrumented system requirements, the implementation phase of functional safety inspection activities, inspection
Management responsibilities and income-generating activities, the activities of the various stages of acceptance in accordance with the content and requirements.
This standard applies to the acceptance of new and expansion of onshore oil and natural gas long-distance pipeline system safety instrumented system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 21109 (all parts) process industry Safety Instrumented Systems Functional Safety
Function GB/T 32202 Oil and Gas Pipeline Safety Instrumented System Safety Assessment Specification
3 acronyms, terms and definitions
3.1 Acronyms
The following abbreviations apply to this document (see Table 1).
Table 1 Acronyms
Acronyms partial explanation
BPCS ESD FAT FDS HMI I/O
PSSR PFD SAT SIF SIL SIS SOE SRS causeandeffectdiagram basicprocesscontrolsystem emergencyshutdown factoryacceptancetest functionaldesignspecification humanmachineinterface input/output pre-startupSafetyReview probabilityofdangerousfailureondemand siteacceptancetest safetyinstrumentedfunction safetyintegritylevel safetyinstrumentedsystem sequenceofevent safetyrequirementspecification
Cause and Effect Diagram
Basic process control system
Emergency Shutdown
Factory Acceptance Test
Functional Design Specification
HMI input Output
Before starting Safety Review
Failure Probability of requirements
Site Acceptance Test
Safety Instrumented Functions
Safety Integrity Level
Safety Instrumented Systems
Sequence of events
Safety requirements specification […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32203-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32203-2015
$535.00