Valid

GB/T 32183-2015Aluminium strips for computer-to-printing plates (English PDF)

计算机直接排版印刷版基用铝带材

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32183-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

November 1, 2016

Scope

GB/T 32183-2015 is the English-translated version of 计算机直接排版印刷版基用铝带材.

GB/T 32183-2015 is the Chinese standard "Aluminium strips for computer-to-printing plates".

Its scope clause reads: This standard specifies the computer-typesetting lithographic aluminum strip with the terms and definitions, requirements, test methods, inspection rules and signs, Packaging, transportation, storage and quality certificate with your order (or contract) content.

This standard applies to direct printing industry computer typesetting lithographic sheet with aluminum (hereinafter referred to as strip). Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 32183-2015

National Standard of the People's Republic of China

ICS
77.150.10
Classification
H 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Flatness

1 Scope

This standard specifies the computer-typesetting lithographic aluminum strip with the terms and definitions, requirements, test methods, inspection rules and signs,

Packaging, transportation, storage and quality certificate with your order (or contract) content.

This standard applies to direct printing industry computer typesetting lithographic sheet with aluminum (hereinafter referred to as strip).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3190 Wrought aluminum and aluminum alloy chemical composition

GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage

GB/T 3880.3 General industrial aluminum and aluminum alloy sheet, strip Part 3. size deviation

GB/T 7999 aluminum and aluminum alloys Optical emission spectroscopy method

GB/T 8170 repair value expressed about the rules and limit values and judgment

GB/T 16865 wrought aluminum, magnesium and their alloys processed products and methods of the tensile test specimens

GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method

GB/T 20975 (all parts), chemical analysis of aluminum and aluminum alloys

GB/T 26492.3 deformable aluminum and aluminum alloy ingot casting and machining product defects Part 3. board with defects

3 Terms and Definitions

GB/T 26492.3 defined and the following terms and definitions apply to this document.

3.1 Flatness

Strip length of the curve between the two valleys (L deltaL) and between (L) and the difference between the two valleys distance L ratio of the distance between the two valleys, with

deltaL

He represents, as shown in Figure 1. Flatness units I, 1I = 10-5. When the strip is seen as a sinusoidal wave, flatness according to equation (1).

deltaL

÷ =

piH

2L

105 (1)

Where.

H --- wave height in millimeters (mm);

L --- the distance between the two valleys, in millimeters (mm);

--- deltaL between two valleys between two valleys and curve length difference between the distance in millimeters (mm).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32183-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32183-2015

$235.00