Valid

GB/T 32151.32-2024Requirements of the greenhouse gas emissions accounting and reporting - Part 32: Coating material production enterprise (English PDF)

温室气体排放核算与报告要求第32部分：涂料生产企业

Preview PDF

This is a limited preview

Buy now to download the full PDF (47 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32151.32-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 29, 2024

Implementation date

April 1, 2025

Scope

GB/T 32151.32-2024 is the English-translated version of 温室气体排放核算与报告要求第32部分：涂料生产企业.

GB/T 32151.32-2024 is the Chinese standard "Requirements of the greenhouse gas emissions accounting and reporting - Part 32: Coating material production enterprise".

Its scope clause reads: This document specifies the calculation boundary, measurement and monitoring requirements, calculation steps and calculation methods of greenhouse gas emissions of coatings manufacturers. data quality management, and report content and format.

This document applies to the accounting and reporting of greenhouse gas emissions by coatings manufacturers. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 32151.32-2024

National Standard of the People's Republic of China

ICS: 13.020.10
Classification: Z04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 Accounting Boundary
5 Measurement and monitoring requirements
6 Calculation steps and methods
7 Data Quality Management
8 Report content and format
Appendix B (Informative) Report Format Template
Appendix C (Informative) Default values of relevant parameters
Appendix D (Informative) Data Quality Control Plan Template

1 Scope

This document specifies the calculation boundary, measurement and monitoring requirements, calculation steps and calculation methods of greenhouse gas emissions of coatings manufacturers.

data quality management, and report content and format.

This document applies to the accounting and reporting of greenhouse gas emissions by coatings manufacturers.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 213 Method for determination of calorific value of coal

GB/T 384 Determination of calorific value of petroleum products

GB/T 476 Determination of carbon and hydrogen in coal

GB/T 6052 Industrial liquid carbon dioxide

GB/T 8984 Determination of carbon monoxide, carbon dioxide and hydrocarbons in gases - Gas chromatography

GB/T 13610 Composition analysis of natural gas - Gas chromatography

GB/T 15316 General technical rules for energy conservation monitoring

GB 17167 General rules for the allocation and management of energy metering instruments in energy-consuming units

GB/T 21367 Requirements for the allocation and management of energy metering instruments in chemical enterprises

GB/T 22723 Determination of energy of natural gas

GB/T 23111 Non-automatic weighing instruments

GB/T 23938 High purity carbon dioxide

GB/T 32150 General principles for accounting and reporting of greenhouse gas emissions from industrial enterprises

HJ38 Determination of total hydrocarbons, methane and non-methane hydrocarbons in waste gas from stationary pollution sources by gas chromatography

HJ828 Water quality-Determination of chemical oxygen demand-Dichromate method

NB/SH/T 0656 Determination of carbon, hydrogen and nitrogen in petroleum products and lubricants - Elemental analyzer method

3 Terms and definitions

The terms and definitions defined in GB/T 32150 and the following apply to this document.

3.1

A legal entity whose main business is the production of architectural coatings, industrial coatings and auxiliary materials, or an independent accounting unit deemed to be a legal entity.

Note. Paint manufacturers include those that only produce paint products and those that simultaneously produce paint products and raw materials such as paint resins and additives.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB 38031-2025|GB/T32151.32-2024|GB/T 1.1-2020|GB/T 32151.|GB/T 32151|GB/T 213|GB/T 384|GB/T 476

How to Download GB/T 32151.32-2024

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.