GB/T 32074-2015Non-destructive testing—Test method for ammonia leak testing (English PDF)
无损检测 氨泄漏检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32074-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 9, 2015
Implementation date
June 1, 2016
Scope
GB/T 32074-2015 is the English-translated version of 无损检测 氨泄漏检测方法.
GB/T 32074-2015 is the Chinese standard "Non-destructive testing—Test method for ammonia leak testing". Its scope clause reads: This standard specifies the ammonia leak detection methods and results of the evaluation.
This standard applies to the system and using ammonia leak detection device can be closed and can be used to detect leaks and determine the leak site. Its clauses include terms and definitions; safety requirements.
Found what you need?
Document preview — GB/T 32074-2015
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Safety requirements
1 Scope
This standard specifies the ammonia leak detection methods and results of the evaluation.
This standard applies to the system and using ammonia leak detection device can be closed and can be used to detect leaks and determine the leak site.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 9445 NDT personnel qualification and certification
GB/T 12604.7 Terminology for nondestructive testing Leak Detection
GB/T 20737 Non-destructive testing - General terms and definitions
3 Terms and Definitions
Terms and definitions GB/T 12604.7 and GB/T 20737 apply to this document defined.
4. Summary
Ammonia leak detection technology is the use of ammonia permeability to detect equipment leaks ammonia charging method has high sensitivity, can detect from
Some small openings high pressure side to the low pressure side of the penetration of ammonia, and determine the location of the leak. Ammonia leak detection include the following three method.
a) filled with 100% ammonia method, this method is not commonly used in the space charge ammonia detection equipment, the low charge ammonia pressure, and can pump it
Leak detection vacuum of 93.7kPa about the case;
b) filled with 10% to 30% (volume fraction) of ammonia, this method is commonly used in a large space filled ammonia detection equipment, and difficult to reach
93.7kPa vacuum leak detection or vacuum requirements to achieve higher cost of case;
c) filled with 1% (volume fraction) of ammonia, this method commonly used in the subject device ammoniated much room situation.
5 Safety requirements
This chapter does not list all of the safety requirements for testing, the use of this standard user security guidelines should be established prior to detection.
Detection process safety requirements include at least the following elements.
a) detection testing personnel shall comply with the safety requirements of the scene, wear protective clothing and wear protection according to the relevant requirements of the detection site equipment;
b) Ammonia is a flammable, explosive gas, the explosive limits of 15% to 18% (volume fraction), the site should be prepared to detect anti-static and fire
Explosion-proof measures;
c) ammonia toxic, and on-site testing personnel should be prepared to isolate the virus and operational measures;
Electronic instruments d) should be of the fire and explosion function;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32074-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32074-2015
$135.00