GB/T 32043-2015Implementation guidance for energy management systems in flat glass industry (English PDF)
平板玻璃行业能源管理体系实施指南
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32043-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
April 1, 2016
Scope
GB/T 32043-2015 is the English-translated version of 平板玻璃行业能源管理体系实施指南.
GB/T 32043-2015 is the Chinese standard "Implementation guidance for energy management systems in flat glass industry".
Its scope clause reads: This standard specifies the flat glass business (hereinafter referred to as enterprises) to establish, implement, maintain and improve its energy management system guidelines and guidance Methods and implementation of the recommendations.
This standard applies according to GB/T 23331-2012 energy management system to establish various types of flat glass business. Rolled glass enterprises can Referring use.
Its clauses include terms and definitions; energy management system requirements.
Found what you need?
Document preview — GB/T 32043-2015
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Energy management system requirements
- 4.1 General Requirements
- 4.2 Management responsibility
- 4.2.1 Top management
- 4.2.2 Management Representative
- 4.3 Energy policy
- 4.4 Planning
- 4.4.1 General
- 4.4.2 laws, regulations and other requirements
- 4.4.3 Energy review
- 4.4.4 Energy Benchmark
- 4.4.5 Energy Performance parameters
- 4.4.6 Energy objectives, energy indicators and energy management Embodiment
- 4.5 Implementation and operation
- 4.5.1 General
- 4.5.2 Competence, training and awareness
- 4.5.3 Information exchange
- 4.5.4 Document
- 4.5.5 Operation Control
- 4.5.6 Design
- 4.5.7 Procurement of energy services, products, equipment and energy
- 4.6 Check
- 4.6.1 Monitoring, Measurement and Analysis
- 4.6.2 Evaluation of Compliance
- 4.6.3 Energy Management System Internal Audit
- 4.6.4 does not comply, correction, corrective action and preventive measures
- 4.6.5 Record control
- 4.7 Management Review
- Appendix A (informative) Example 13 energy review
- Annex B (informative) Example 23 energy management system implementation
- Annex C (informative) flat glass production enterprise number "0" Gun oxygen combustion technology energy-saving example
- References
1 Scope
This standard specifies the flat glass business (hereinafter referred to as enterprises) to establish, implement, maintain and improve its energy management system guidelines and guidance
Methods and implementation of the recommendations.
This standard applies according to GB/T 23331-2012 energy management system to establish various types of flat glass business. Rolled glass enterprises can
Referring use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 11614 Flat Glass
GB 17167 energy use per unit of energy measuring instruments and General Manager
GB 21340 of energy consumption per unit product of flat glass
GB/T 23331-2012 energy management system requirements
GB/T 24851 building materials industry, measuring instruments and energy management requirements
GB/T 29456-2012 Energy Management System Implementation Guide
GB 50527 flat glass factory design of energy
3 Terms and Definitions
Terms and definitions GB/T 23331-2012 and GB/T 29456-2012, as defined in this document apply.
4 Energy management system requirements
4.1 General requirements
4.1.1
Enterprises should be in accordance with GB/T 23331-2012 requirements and relevant laws and regulations, policies, standards, and combined with their own situation
Establish, implement, maintain and improve the energy management system. The production technology and equipment to meet the requirements of national industrial policy, product line
GB 11614 requirements, energy consumption per unit of product to meet the requirements of GB 21340, measuring instruments and energy management in line with
GB 17167 and GB/T 24851 requirements.
4.1.2
The enterprise should determine the boundaries and scope of the energy management system, and documented. Energy management system scope and boundaries include.
--- Major production systems. preparation of raw materials, melting, forming, annealing, cold end and so on;
--- Auxiliary and ancillary production system. electricity, water, gas, fuel processing, preparation of protective gas, cogeneration, waste heat heating and air conditioning
And other waste heat utilization cascade process, the sewage treatment process, heating, cooling, machine repair, instrumentation, test and measurement, information management, lighting, libraries,
House, plant transportation, plant materials and office space, logistics and so on.
Scope and boundaries of enterprise energy management system will be based on changing business activities and functions, location and activities and changes
Variety.
4.1.3
The enterprise should develop feasible implementation plan, the implementation of effective energy management, energy objectives and targets, and improve enterprise energy
Performance.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32043-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32043-2015
$535.00