Valid

GB/T 32025-2015Aluminum coated glass mirror (English PDF)

镀铝玻璃镜

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32025-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 11, 2015

Implementation date

April 1, 2016

Scope

GB/T 32025-2015 is the English-translated version of 镀铝玻璃镜.

GB/T 32025-2015 is the Chinese standard "Aluminum coated glass mirror". Its scope clause reads: This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of aluminum coated glassmirror.

This standard is applicable to the mirrors intended for indoor use, which are manufactured using flat glass as the substrate, coated with an aluminum film through vacuum magnetron sputtering coating or vacuum evaporation coating processes, and subsequently provided with a protective layer of paint.

This standard is not applicable to aluminum coated glassmirrors made with non-flat glass or processed flat glass products as the substrate, such as mirrors made from patterned glass, tempered glass, semi-tempered glass, laminated glass, or hot-bent glass. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 32025-2015

National Standard of the People's Republic of China

ICS
97.180
Classification
Y 89

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification
  • 5 Materials
  • 6 Requirements
  • 7 Test methods
  • 8 Inspection rules
  • 9 Marking, packaging, transportation and storage

1 Scope

This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, as well as marking, packaging, transportation and storage of aluminum coated glassmirror.

This standard is applicable to the mirrors intended for indoor use, which are manufactured using flat glass as the substrate, coated with an aluminum film through vacuum magnetron sputtering coating or vacuum evaporation coating processes, and subsequently provided with a protective layer of paint.

This standard is not applicable to aluminum coated glassmirrors made with non-flat glass or processed flat glass products as the substrate, such as mirrors made from patterned glass, tempered glass, semi-tempered glass, laminated glass, or hot-bent glass.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (fog)

GB/T 2680 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors

GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection

GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)

GB/T 6739-2006 Paints and varnishes - Determination of film hardness by pencil test

GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values

GB/T 9286-1998 Paints and varnishes - Cross cut test for films

GB 11614-2009 Flat glass

GB/T 13452.1-1992 Paints and varnishes - Determination of total lead - Flame atomic absorption spectrometric method

GB/T 28804-2012 Copper-free silver mirror on flat glass

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 spot faults

spot faults, such as gaseous or solid impurities, attachments and fragments, cause halo together with their surrounding areas. The size of a spot fault shall be based on its core part

3.2 scratches

scratches on the glass surface caused by scratching, scraping, grinding, etc.

3.3 color spots

small color spots generated in the reflective layer

3.4 dark stripe

strip area where the brightness or reflected color of the mirror surface differs from the overall appearance

3.5 stain

cloud-like, radial, or streaky faults where the mirror surface color has changed

3.6 corrosion

localized chemical attack occurring at the edge or in the middle of the product

3.7 cluster

presence of three or more spot faults within a circle of 100mm in diameter

3.8 edge faults

faults on the edge of the finished product, including projection/concave, chip, and corners on/off

3.9 halo

phenomenon forming around a spot fault that distorts the reflected light

3.10 chip

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32025-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32025-2015

$185.00