GB/T 31998-2015Technical specification on softswitch systems of power industry (English PDF)
电力软交换系统技术规范
This is a limited preview
Buy now to download the full PDF (41 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31998-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
April 1, 2016
Scope
GB/T 31998-2015 is the English-translated version of 电力软交换系统技术规范.
GB/T 31998-2015 is the Chinese standard "Technical specification on softswitch systems of power industry". Its scope clause reads: This standard specifies the composition of the power soft switching system, defined the main function of each part, as well as the performance of the basic interface requirements.
This standard applies to the planning and design of power softswitch systems, construction and equipment development.
Found what you need?
Document preview — GB/T 31998-2015
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- F 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 protocol standardization requirements
- 6 Power Softswitch basic requirements
- 6.1 Network Structure
- 6.2 device features
- 6.3 System Performance Requirements
- 6.4 Basic Interface and Protocol
- 6.5 Network management features
- 7 soft power dispatching exchange system
- 7.2 Interface
- 7.3 Device Features
- 7.4 system performance and reliability metrics
- 8 indicators and quality of service IP bearer network technical requirements
- 8.1 softswitch IP bearer network division
- 8.2 Softswitch service quality indicators
- 8.3 softswitch IP bearer network quality requirements
- 8.4 bearer network IP address assignment
- 9 system security and reliability requirements
- 9.1 Safety requirements
- 9.2 reliability requirements
- 10 environmental requirements
- 10.1 Power
- 10.2 Temperature and humidity
- 10.3 insulation and electromagnetic compatibility
- Appendix A (normative) Softswitch Interworking call control process specification
1 Scope
This standard specifies the composition of the power soft switching system, defined the main function of each part, as well as the performance of the basic interface requirements.
This standard applies to the planning and design of power softswitch systems, construction and equipment development.
2 Normative references
The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4798.3-2007 application of electric and electronic products environmental conditions - Part 3. Stationary use at weather protected locations (IEC 60721-3-3.2002, MOD)
GB/T 9254 Limits and methods of measurement of radio disturbance of information technology equipment (GB 9254-2008, CISPR22.2006, IDT)
GB/T 14598.3-2006 Electrical relays - Part 5. Measuring relays and protection equipment insulation coordination requirements and tests (IEC 60255-5.2000, IDT)
GB/T 15542-1995 digital program-controlled telephone exchange technical requirements
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques Section 2. Electrostatic discharge immunity test (IEC 61000-4-
2.2004, IDT)
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques - Part 3. Test RFEMS (IEC 61000-4-3.2002, IDT)
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques Section 4. Electrical fast transient burst immunity test (IEC 61000-4-4.2004, IDT)
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test (IEC 61000-4-5.
2005, IDT)
GB/T 17626.12-1998 electromagnetic compatibility test and measurement techniques - Oscillatory waves immunity test (idt IEC 61000-4-12.
1995)
GB/T 28505-2012 national No.7 signaling system technical requirements of 2Mbit/s high-speed signaling link
ISO /IEC 14496 Information technology - Generic coding of audio and video objects (Informationtechnology-Genericcodingof audio-visualobjects)
IEEE802.3af data terminal equipment powered via media independent interface (DataTerminalEquipmentPowervia
MediaDependentInterface)
IETFRFC1350 Trivial File Transfer Protocol (TheTFTPProtocol)
IETFRFC2131 Dynamic Host Configuration Protocol (DynamicHostConfigurationProtocol)
IETFRFC2327 Session Description Protocol (SessionDescriptionProtocol)
IETFRFC2571 Simple Network Management Protocol framework (AnArchitectureforDescribingSNMPManagement
Frameworks)
IETFRFC2719 signaling framework (FrameworkArchitectureforSignalingTransport)
IETFRFC2833 for DTMF digits, telephony tones and telephony signals RTP payload format (RTPPayloadfor
DTMFDigits, TelephonyTonesandTelephonySignals) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31998-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31998-2015
$650.00