GB/T 31982-2015Modular design specification of mechanical products (English PDF)
机械产品模块化设计规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31982-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
April 1, 2016
Scope
GB/T 31982-2015 is the English-translated version of 机械产品模块化设计规范.
GB/T 31982-2015 is the Chinese standard "Modular design specification of mechanical products". Its scope clause reads: This standard specifies the basic principles of mechanical products modular design, typical process and main methods.
This standard is applicable to mechanical products and modular design of mechatronic products in the mechanical structure portion. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31982-2015
National Standard of the People's Republic of China
- ICS
- 25.040.40
- Classification
- L 67
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3 4.1 The principle of independence
- 4.2 Principle 3 simplification
- 4.3 General Principle
- 4.4 overall optimization principles
- 5 The modular design of mechanical products typical process model
- 5.1 Overview
- 5.2 New modular platform build process
- 5.3 has modular product platform build process
- 5.4 modular product platform maintenance procedures
- 6.1 New modular platform construction method
- 6.2 product has a modular platform construction method
- 6.3 modular product platform maintenance method
- 6.4 customized product modular design
- Appendix A (informative) Classification module commonly used method
- References
1 Scope
This standard specifies the basic principles of mechanical products modular design, typical process and main methods.
This standard is applicable to mechanical products and modular design of mechatronic products in the mechanical structure portion.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 321 priority number and priority number system
GB/T 10091.1 SML definitions and principles
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Module
Components of the system, with the typical generic independent unit determines the functions and standard interfaces.
[GB/T 30438-2013, Definition 3.1]
Note. The classification module commonly used method in Appendix A.
3.2 Machine module
A full-featured, stand-alone product or can be composed of complete sets of equipment (or equipment), with independent functions and standard interface unit.
3.3 Component module
Composition of the upper part (or whole), with independent functions and standard interface unit.
NOTE. The product consists of a complex multi-layer components can be progressively realized by recursively modular design.
3.4 Part module
Component parts (or the whole), with independent functions and standard interfaces, can no longer be broken down into separate entities units.
3.5 Characteristics unit module
Composed of complex parts feature unit.
Note. Features unit module is part of part of the structure, it is not an independent entity.
3.6 Structural modules
Module structure by product division.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31982-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31982-2015
$295.00