GB/T 31933-2015Test method for the corrosion of steel bar embedded in concrete in chloride enviroment (English PDF)
模拟海洋环境钢筋耐蚀试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31933-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2015
Implementation date
June 1, 2016
Scope
GB/T 31933-2015 is the English-translated version of 模拟海洋环境钢筋耐蚀试验方法.
GB/T 31933-2015 is the Chinese standard "Test method for the corrosion of steel bar embedded in concrete in chloride enviroment". Its scope clause reads: This standard specifies the method for evaluation of a simulated marine environment of reinforced concrete structures resistance to chlorine ion corrosion.
This standard applies to reinforced concrete chloride ion corrosion resistance test. This standard consists of the following two methods, testing personnel can choose according to the actual conditions.
Method A --- reinforced concrete resistant to chlorine ions in the corrosion test methods. By reaches a predetermined charge time to evaluate reinforced rot Corrosion performance.
Under Method B --- marine environment reinforced Comparative Test methods of corrosion rate in concrete structures. By contrast with the steel bar corrosion Compare rates to evaluate the steel corrosion. Its clauses include materials.
Found what you need?
Document preview — GB/T 31933-2015
National Standard of the People's Republic of China
- ICS
- 77.060
- Classification
- H 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Materials
- 3.1 Cement
- 3.2 Aggregate
1 Scope
This standard specifies the method for evaluation of a simulated marine environment of reinforced concrete structures resistance to chlorine ion corrosion.
This standard applies to reinforced concrete chloride ion corrosion resistance test.
This standard consists of the following two methods, testing personnel can choose according to the actual conditions.
Method A --- reinforced concrete resistant to chlorine ions in the corrosion test methods. By reaches a predetermined charge time to evaluate reinforced rot
Corrosion performance.
Under Method B --- marine environment reinforced Comparative Test methods of corrosion rate in concrete structures. By contrast with the steel bar corrosion
Compare rates to evaluate the steel corrosion.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 1499.2 steel reinforced concrete - Part 2. Hot rolled ribbed bars
GB/T 1630.1-2008 Plastics - Epoxy - Part 1. Designation
GB/T 5462-2003 industrial salt
GB 8076-2008 concrete admixture
Removal of corrosion products from corrosion specimens GB/T 16545-1996 metals and alloys
Pitting corrosion evaluation method GB/T 18590 of metals and alloys
Electrochemical Corrosion Test Method potentiostat GB/T 24196 of metals and alloys and potentiodynamic polarization measurements
GB/T 50080 ordinary concrete mixture performance test method standards
GB/T 50107 Concrete Strength Inspection and Evaluation Standards
GB 50204 Construction Quality Acceptance of Concrete Structure Engineering
GB 50448 cement-based grouting material specifications
YB/T 9231 rust inhibitor application of technical regulations
JB/T 10579 standard method of corrosion data statistical analysis
JG237 concrete tryout
JGJ52 ordinary concrete sand, stone quality standards and test methods
JGJ55 ordinary concrete mix design procedures
3 Materials
3.1 Cement
It should be selected in line with the requirements of GB 8076-2008 Appendix A of standard cement.
3.2 Aggregate
Shall comply with the provisions of JGJ52, fine aggregate selection JGJ52 sand, coarse aggregate selection 5mm ~ 10mm gravel.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31933-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31933-2015
$165.00