GB/T 31723.412-2021Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method (English PDF)
金属通信电缆试验方法 第4-12部分:电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31723.412-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 31723.412-2021 is the English-translated version of 金属通信电缆试验方法 第4-12部分:电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法.
GB/T 31723.412-2021 — This part of GB/T 31723 describes the coupling or shielding attenuation test method for connecting hardware for analog and digital communication systems: This section applies to testing single connection hardware (for example: a separate wall socket or plug), also applies to testing connection hardware plug match:
Found what you need?
Document preview — GB/T 31723.412-2021
National Standard of the People's Republic of China
- Classification
- L 26
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Test methods
foreword
The electromagnetic compatibility part of GB/T 31723 "Test methods for metallic communication cables" has released the following parts:
--- Part 4-5: Electromagnetic compatibility coupling or shielding attenuation absorption clamp method;
--- Part 4-6: Electromagnetic compatibility surface transfer impedance line injection method;
--- Part 4-11: Coupling attenuation or shielding attenuation absorption of electromagnetic compatibility jumpers, coaxial cable assemblies, and connectorized cables
clamp method;
--- Part 4-12: Coupling attenuation or shielding attenuation absorption clamp method of electromagnetic compatibility connecting hardware;
--- Part 4-13: Coupling attenuation absorption clamp method for electromagnetic compatibility links and channels (laboratory conditions);
--- Part 4-14: Coupling attenuation absorption clamp method for electromagnetic compatibility cable assemblies (field conditions):
This part is part 4-12 of GB/T 31723:
This section is drafted in accordance with the rules given in GB/T 1:1-2009:
This section uses the translation method equivalent to IEC 62153-4-12:2009 "Test methods for metallic communication cables - Part 4-12: Electromagnetic and
Coupling or Shielding Attenuation Absorption Clamping of Capacitive Connection Hardware:
The Chinese documents that have consistent correspondence with the international documents normatively cited in this part are as follows:
---GB/T 14733:2-2008 Telecommunications Terminology Transmission Lines and Waveguides [IEC 60050-726:1982, IDT];
---GB/T 17737:1-2013 Coaxial Communication Cable Part 1: General Specifications General Rules, Definitions and Requirements (IEC 61196-1:
2005, IDT):
The following editorial changes have been made to this section:
---According to the order of appearance in the text, the positions of footnotes c and d in Table 1 are exchanged;
--- The fourth paragraph of 4:1:3:1 and the "jumper wire" in 4:5 are corrected to "connect the hardware":
Please note that some content of this document may be patented: The issuing authority of this document assumes no responsibility for identifying these patents:
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China:
This part is under the jurisdiction of the National Standardization Technical Committee of High Frequency Cables and Connectors for Electronic Equipment (SAC/TC190):
This section was drafted by: China Electronics Standardization Institute, Shenzhen Kingsignal High-tech Co:, Ltd:
1 Scope
This part of GB/T 31723 describes the coupling or shielding attenuation test method for connecting hardware for analog and digital communication systems:
This section applies to testing single connection hardware (for example: a separate wall socket or plug), also applies to testing connection hardware plug
match:
2 Normative references
The following documents are essential for the application of this document: For dated references, only the dated version applies to this document.
pieces: For undated references, the latest edition (including all amendments) applies to this document:
GB/T 31723:405-2015 Test methods for metallic communication cables Part 4-5: Electromagnetic compatibility coupling or shielding attenuation absorption
Clamping method (IEC 62153-4-5:2006, IDT)
IEC 60050-726 International Electrotechnical Vocabulary Part 726: Transmission lines and waveguides (International Electrotechnical Vo-
cabulary-Part 726: Transmissionlinesandwaveguides)
IEC 61196-1 Coaxial Communication Cables Part 1: General Specifications General, Definitions and Requirements (Coaxialcommunicationca-
bles-Part 1:Genericspecification-General,definitionsandrequirements)
ITU-T Recommendation G:117:1996 Unbalanced transmission to ground (Transmissionaspectsofunbalanceabout
earth)
ITU-T RecommendationO:9:1999 Test configuration for evaluating unbalance to ground (Measuringarrangementsto
assessthedegreeofunbalanceaboutearth)
3 Terms and Definitions
Terms and definitions defined in IEC 60050-726 and IEC 61196-1 apply to this document:
Connection hardware is defined in this section as a complete connection including compensation or matching networks (if any), connectors and cable terminations
connection device:
4 Test methods
4:1 Equipment
4:1:1 General
See 5:1:1 in GB/T 31723:405-2015 and Figure 1 in this section:
The connection hardware to be tested shall be terminated with a termination method and a cable compatible with its construction: If only a part of the connected hardware is measured
If it is divided, a test port should be used to insert the part under test:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 31723 · IEC 62153 · IEC 60050 · IEC 61196
How to Download GB/T 31723.412-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 31723.405-2015 — Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method
GB/T 31723.405-2026 — Metallic communication cable test methods - Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method
GB/T 31723.406-2015 — Metallic cable and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - Line injection method
GB/T 31723.412-2021
$150.00