Valid

GB/T 31593.2-2015Fire safety engineering—Part 2: Data and information needed for FSE (English PDF)

消防安全工程 第2部分:所需数据类型与信息

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31593.2-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 2, 2015

Implementation date

August 1, 2015

Scope

GB/T 31593.2-2015 is the English-translated version of 消防安全工程 第2部分:所需数据类型与信息.

GB/T 31593.2-2015 is the Chinese standard "Fire safety engineering—Part 2: Data and information needed for FSE". Its scope clause reads: This part of GB/T 31593 specifies the types of data needed for fire safety engineering and the method guidelines for obtaining such data.

This part applies to various physical and mathematical models or engineering analysis methods for determining the suitability of various data for fire safety engineering, and provides guidance for fire performance designers, reviewers and fire safety engineering technicians for design assessment using fire safety engineering methods. Its clauses include terms and definitions; data source and use.

Found what you need?

Document preview — GB/T 31593.2-2015

National Standard of the People's Republic of China

ICS
13.220.01
Classification
C 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Contents
  • Foreword i
  • Introduction ii
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Data source and use
  • 5 Relevant data of the built environment
  • 6 Relevant data on fire products
  • 7 Data on fire spread
  • 8 Data on fire protection system
  • 9 Data on people behavior
  • 10 Data on environmental and property protection
  • 11 Data on fire risk assessment
  • Bibliography
  • .detail td {

1 Scope

This part of GB/T 31593 specifies the types of data needed for fire safety engineering and the method guidelines for obtaining such data.

This part applies to various physical and mathematical models or engineering analysis methods for determining the suitability of various data for fire safety engineering, and provides guidance for fire performance designers, reviewers and fire safety engineering technicians for design assessment using fire safety engineering methods.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 5135.1 Automatic sprinkler system - Part 1: Sprinklers

GB/T 5907 (all parts) Fire protection vocabulary

GB 8624 Classification for burning behavior of building materials and products

GB/T 8626 Non-combustibility test method for building materials

GB/T 8627 Test method for density of smoke from the burning or decomposition of building materials

GB/T 14402 Reaction to fire tests for building materials and products - Determination of the heat of combustion

GB/T 14523 Reaction to fire tests - Ignitability of building products using a radiant heat source

GB/T 16172 Test method for heat release rate of building materials

GB/T 31592 Fire safety engineering - General principles (GB/T 31592-2015, ISO 23932:2009, MOD)

GB/T 31593.4 Fire safety engineering - Part 4: Selection of design fire scenarios and design fires (GB/T 31593.4-2015, ISO 16733:2006, MOD)

GB/T 31593.5 Fire safety engineering - Part 5: Requirements governing algebraic equations for fire plumes (GB/T 31593.5-2015, ISO 16734:2006, MOD)

GB/T 31593.9 Fire safety engineering - Part 9: Guidance on evaluation of behaviour and movement of people (GB/T 31593.9-2015, ISO/TR 16738:2009, MOD)

GA/T 505 Method of preparing the fire scenario effluents from a material

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 5907 and GB/T 31592 apply.

4 Data source and use

4.1 Data source

4.1.1 Data required for fire prevention

For design conducted in accordance with fire performance codes and methods, it is necessary to obtain relevant data such as the occurrence, development and spread of fire, fire environment, human responses to fire, fire protection systems, building structures and design objectives. For example, the data information of the fire protection system shall include alarm, fire suppression, smoke control and exhaust, etc.

4.1.2 Data required to predict fire consequences

For predicting the impact of fire on people, fire safety systems, building structures and the environment, it is necessary to obtain relevant data on fire occurrence, development and spread, heat flux, combustion products and their spread:

—Number, distribution and response of people, as well as the possible effects of various interventions, system maintenance and management. For data information, see GB/T 31593.9;

—The function and reliability of the fire protection system, the reliability of system working procedures and personnel operation, etc.;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 31593.2-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31593.2-2015

$205.00