GB/T 31577-2015Inspection of grain and oils - Determination of damaged starch by an amperometric method (English PDF)
粮油检验 小麦粉损伤淀粉测定 安培计法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31577-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
November 23, 2015
Scope
GB/T 31577-2015 is the English-translated version of 粮油检验 小麦粉损伤淀粉测定 安培计法.
GB/T 31577-2015 is the Chinese standard "Inspection of grain and oils - Determination of damaged starch by an amperometric method".
Its scope clause reads: This standard specifies the use of the principle amperometric measuring wheat flour starch damage, instruments and equipment, reagents, for sampling, procedure, results count Operators, precision, and report the results.
This standard applies to the determination of wheat flour damaged starch. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31577-2015
National Standard of the People's Republic of China
- ICS
- 67.060
- Classification
- X 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Damage starch
- 5.1 Injury starch tester 1) (see Appendix A)
1 Scope
This standard specifies the use of the principle amperometric measuring wheat flour starch damage, instruments and equipment, reagents, for sampling, procedure, results count
Operators, precision, and report the results.
This standard applies to the determination of wheat flour damaged starch.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5491 grain and oilseeds testing for sampling, and sample method
GB/T 5497 grain and oilseeds - Determination of water test
GB/T 5511 Cereals and pulses - Determination of nitrogen content and calculation of crude protein content Kjeldahl method
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Damage starch
Mechanical damage generated during milling damaged starch granules.
Principle 4
Under certain conditions, the suspension of wheat flour starch damage more iodine absorption, the smaller current through suspension. By the electrochemical reaction
Ying, produce the measured quality of wheat flour is proportional to the iodine, and the amount of iodine absorbed by the sample, determine the amount of damage to the starch sample.
5 instruments and appliances
5.1 Injury starch tester 1) (see Appendix A)
The instrument should be calibrated periodically, it has the following technical parameters.
1) This standard is based on the French company's SDmatic CHOPIN based formulation. This information is provided for the convenience of the user of this standard to use, without
It is recognized by the instrument. All meet the test requirements of the instrument can be used.
--- Stirring rod speed. (1200 ± 5) r/min;
--- Vibration motor speed. (8500 ± 2000) r/min;
--- Heater resistance. diameter 8mm, power 60W;
--- Measuring rod. diameter 6mm, 4 platinum electrodes;
--- NTC (negative temperature coefficient) thermistor sensor. 10kohm, 0 °C ~ 80 °C, 35 °C temperature control accuracy of 1%.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31577-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31577-2015
$205.00