GB/T 31512-2015Economic operation of water-source heat pump systems (English PDF)
水源热泵系统经济运行
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31512-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
December 1, 2015
Scope
GB/T 31512-2015 is the English-translated version of 水源热泵系统经济运行.
GB/T 31512-2015 is the Chinese standard "Economic operation of water-source heat pump systems". Its scope clause reads: This standard specifies the basic requirements for water source heat pump system economic operation, and evaluation methods, test methods and management measures.
This standard applies to cold water (hot) source, household, industrial and commercial use and similar use electric mechanical compression type water source heat pump system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31512-2015
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Water source heat pump system,
- 3.2 Economy
- 3.3 Cooling system efficiency systemenergyefficiencyratio; EERs
- 3.4 Heating system efficiency systemcoefficientofperformance; COPs
- 4.1 Basic requirements
- 4.2 Requirements for use of the environment to the system
1 Scope
This standard specifies the basic requirements for water source heat pump system economic operation, and evaluation methods, test methods and management measures.
This standard applies to cold water (hot) source, household, industrial and commercial use and similar use electric mechanical compression type water source heat pump system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 17981 economic operation of the air conditioning system
GB/T 19409 water (ground) source heat pump
GB 50366 ground source heat pump systems engineering technical specifications
3 Terms and Definitions
GB/T 17981, GB/T 19409 and defined by the following terms and definitions apply to this document.
3.1 Water source heat pump system,
Overall water source heat pump units and with the support of water systems (including pumps, cooling towers, etc.) and wind system consisting of (hereinafter referred to as "system
System ").
3.2 Economy
Meet process requirements, the production of safe and reliable operation, based on the water source heat pump system through scientific management, adjusted operating conditions
Section or technological improvements, allowing the system to achieve a reasonable match, the system in order to achieve low power consumption, good economic operation mode.
3.3 Cooling system efficiency systemenergyefficiencyratio; EERs
The cumulative amount of cooling water source heat pump system in the measurement period of preparation and consumption of the total system power consumption ratio.
3.4 Heating system efficiency systemcoefficientofperformance; COPs
Cumulative Heating capacity water source heat pump system in the measurement period of preparation and consumption of the total system power consumption ratio.
Basic requirements 4 System Economic Operation
4.1 Basic requirements
Economic operation should meet the basic requirements of GB/T 17981 requirements.
4.2 Requirements for use of the environment to the system
4.2.1
water source heat pump cold (hot) source operating temperature should be clearly defined in the product specification, the temperature range, and should be close to water sources […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31512-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31512-2015
$145.00