Valid

GB/T 31204-2014Carbon steel investment casting (English PDF)

熔模铸造碳钢件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31204-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

June 1, 2015

Scope

GB/T 31204-2014 is the English-translated version of 熔模铸造碳钢件.

GB/T 31204-2014 is the Chinese standard "Carbon steel investment casting". Its scope clause reads: This standard specifies classification and designation, technical requirements, test methods and inspection rules as well as marking, packaging, transport and storage of carbon steel investment casting.

This standard is applicable to carbon steel investment casting for general engineering. Its clauses include classification and designation.

Found what you need?

Document preview — GB/T 31204-2014

National Standard of the People's Republic of China

ICS
77.140.80
Classification
J 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative References
  • 3 Classification and Designation
  • 4 Technical Requirements
  • 5 Test Method
  • 6 Inspection Rules
  • 7 Marking, Certification, Surface Protection, Packaging, Transport and Storage
  • Annex A (Normative) Pattern Draft of Carbon Steel Investment Casting
  • Annex B (Normative) Drawings of Keel Block, Plum Blossom Test Block and Tensile Specimen

1 Scope

This standard specifies classification and designation, technical requirements, test methods and inspection rules as well as marking, packaging, transport and storage of carbon steel investment casting.

This standard is applicable to carbon steel investment casting for general engineering.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 223.5 Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method

GB/T 223.12 Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Carbonate Separation-diphenyl Carbazide Photometric Method for the Determination of Chromium Content

GB/T 223.14 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content

GB/T 223.23 Iron Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method

GB/T 223.26 Iron Steel and Alloy - Determination of Molybdenum Content - The Thiocyanate Spectrophotometric Method

GB/T 223.53 Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content

GB/T 223.59 Iron Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method

GB/T 223.64 Iron Steel and Alloyed - Determination of Manganese Content - Flame Atomic Absorption Spectrometric Method

GB/T 223.69 Iron Steel and Alloy - Determination of Carbon Contents - Gas-volumetric Method after Combustion in the Pipe Furnace

GB/T 223.72 Iron Steel and Alloy - Determination of Sulfur Content - Gravimetric Method

GB/T 223.84 Steel and Iron - Determination of Titanium Content - Diantipyrylmethane Spectrophotometric Method

GB/T 223.85 Steel and Iron - Determination of Sulfur Content - Infrared Absorption Method after Combustion in an Induction Furnace

GB/T 224 Determination of Depth of Decarburization of Steels

GB/T 228.1 Metallic Materials - Tensile Testing - Part 1 : Method of Test at Room Temperature

GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method

GB/T 230.1 Metallic Materials - Rockwell Hardness Test - Part 1: Test Method (Scales A, B, C, D, E, F, G, H, K, N and T)

GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method

GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission Spectrometric Analysis of Carbon and Low-Alloy Steel (Routine Method)

GB/T 5677 Radiographic testing for steel castings

GB/T 6414-1999 Castings - System of Dimensional Tolerances and Machining Allowances

GB/T 7233.1 Steel Castings - Ultrasonic Examination - Part 1: Steel Castings for General Purposes

GB/T 9443 Penetrant Testing for Steel Castings

GB/T 9444 Magnetic Particle Testing for Steel Castings

GB/T 11352 Carbon Steel Castings for General Engineering Purpose

GB/T 15056-1994 Evaluation Method on Cast Surface Roughness

HB 6573 Standard Reference Radiographic Film for Investment Casting

3 Classification and Designation

3.1 Classification

It is classified into 3 types by casting working condition and purpose, see Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31204-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31204-2014

$95.00