Valid

GB/T 31136-2014Temperature control cabinet for industrial resistance furnace (English PDF)

工业电阻炉温度控制柜

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31136-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

February 1, 2015

Scope

GB/T 31136-2014 is the English-translated version of 工业电阻炉温度控制柜.

GB/T 31136-2014 is the Chinese standard "Temperature control cabinet for industrial resistance furnace".

Its scope clause reads: This standard specifies the KRC, KRD, KRG, KRJ and KRY series of industrial resistance furnace temperature control cabinet (hereinafter referred to as temperature control cabinet) each Entry requirements, including product classification, technical requirements, test methods, inspection rules, technical grade and ordering and delivery.

This standard applies to supporting a variety of industrial resistance furnace temperature control cabinet. For other industrial resistance furnace with temperature control cabinet, this standard for reference purposes only. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31136-2014

National Standard of the People's Republic of China

ICS: 25.180.10
Classification: K 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Product Category
4.1 2 varieties and specifications
4.2 Part
5 4.3 Dimensions
4.4 The main parameters
5 Technical requirements
5.1 General requirements
5.2 pairs of complementary design and manufacture of claim
5.3 Performance
5.4 Security
5.5 sets requirements
6 Test methods
6.1 General Requirements
6.3 Dielectric strength test
6.4 13 power-on test
6.6 Temperature measurement accuracy
6.7 Power Conditioning Test
6.8 Output voltage regulation test
6.9 Check the main circuit waveform
6.10 Protection System checks
7 inspection rules and grading
7.1 General
7.2 factory inspection items
7.3 Type test item
7.4 Technical grade
8 signs, packaging, transportation and storage
9 Ordering and Delivery

1 Scope

This standard specifies the KRC, KRD, KRG, KRJ and KRY series of industrial resistance furnace temperature control cabinet (hereinafter referred to as temperature control cabinet) each

Entry requirements, including product classification, technical requirements, test methods, inspection rules, technical grade and ordering and delivery.

This standard applies to supporting a variety of industrial resistance furnace temperature control cabinet.

For other industrial resistance furnace with temperature control cabinet, this standard for reference purposes only.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2900.23-2008 Electrotechnical terminology industrial electric equipment

GB/T 3047.1-1995 height of 20mm hex panels, rack and cabinets Series of basic dimensions

GB/T 4025-2010 basic coding rules and safety rules and operation of the device indicator HMI flag identified

Logo GB/T basic safety rules and equipment terminals and conductor terminal 4026-2010 HMI flag identified

GB 4208-2008 shell protection (IP code)

GB 4884-1985 mark insulated wire

GB 5959.4-2008 Safety of electric devices - Part 4. Particular requirements for resistance heating device

GB 7947-2010 mark HMI basic safety rules and conductor colors or alphanumeric identifier identifies

GB/T 10066.1-2004 Test methods for electroheat installations - Part 1. General section

GB/T 10067.1-2005 basic technical conditions for electric devices - Part 1. General section

GB/T 10067.4-2005 Electric equipment basic technical conditions - Part 4. Indirect resistance furnaces

GB/T 13324-2006 term heat treatment equipment

GB/T 25480-2010 instrumentation transportation, storage and basic environmental conditions and test methods

JB/T 3283-2010 thyristor AC power controller

3 Terms and Definitions

GB/T 2900.23-2008, GB/T 13324-2006 define the following terms and definitions apply to this document.

3.1 Thyristor element siliconcontroledrectifier; SCR

Thyristor

High-power semiconductor device having a PN junction of three four-story structure, with small, relatively simple structure, powerful features, is

One of the more commonly used semiconductor device, used to achieve controlled rectifier, inverter, frequency, voltage, non-contact switch and other functions.

3.2 Thyristor AC power switch

Solid State Relay solidstaterelay; SSR By a non-contact electronic switch TRIAC anti-parallel configuration, or a random selection method controlling switching AC power controller.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

GB/T 37752.6-2025|GB/T 10067.37-2024|GB/T 37752.5-2024|GB/T 10067.101-2023|GB/T 10067.417-2023|GB/T 10067.6-2023

How to Download GB/T 31136-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.