GB/T 31115-2014Application guidelines of HACCP system in bean products (English PDF)
豆制品生产HACCP应用规范
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31115-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
February 1, 2015
Scope
GB/T 31115-2014 is the English-translated version of 豆制品生产HACCP应用规范.
GB/T 31115-2014 is the Chinese standard "Application guidelines of HACCP system in bean products".
Its scope clause reads: This standard specifies the terms and definitions soybean production enterprises to establish and implement the Hazard Analysis and Critical Control Point (HACCP) system, General requirements and documentation requirements of Good Manufacturing Practice (GMP), sanitation standard operating procedures (SSOP), standard operating procedures (SOP) and HACCP Establish procedures and other system requirements.
This standard applies to the establishment, implementation and evaluation of soybean producers HACCP system. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31115-2014
National Standard of the People's Republic of China
- ICS
- 67.060
- Classification
- X 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 HACCP system
- 5 Good Manufacturing Practice
- 6 Sanitation Standard Operating Procedure
- 7 Standard Operating Procedures
- 9 Dissemination and training
- 10 Other
- Appendix A (Informative Appendix) HACCP application logic program
- Appendix B (normative) Good Manufacturing Practice
- Annex C (normative) sanitation standard operating procedures
- Annex D (normative) Standard Operating Procedure 14 soybean production
- Appendix E (normative) and CCP decision tree recognition sequence
- Annex F (informative) soybean production HACCP plan pattern table (North tofu as an example)
- References
1 Scope
This standard specifies the terms and definitions soybean production enterprises to establish and implement the Hazard Analysis and Critical Control Point (HACCP) system,
General requirements and documentation requirements of Good Manufacturing Practice (GMP), sanitation standard operating procedures (SSOP), standard operating procedures (SOP) and HACCP Establish procedures and other system requirements.
This standard applies to the establishment, implementation and evaluation of soybean producers HACCP system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 2760 national food safety standards of food additives using standard
GB 5749 drinking water health standards
GB 7718 National Food Safety Standard pre-packaged food labels General
GB/T 19000 Quality management systems Fundamentals and vocabulary
GB/T 19080 Food & Beverage GB/T 19001-2000 Application Guide
GB/T 19538 Hazard Analysis and Critical Control Point (HACCP) System and Application Guide
Packing Administration of Quality Supervision, Inspection and Quarantine Supervision and Administration of Commodity Measurement Order [2005] No. 75
Food labeling regulations of the State Administration of Quality Supervision, Inspection and Quarantine Order No. 123 [2009]
3 Terms and Definitions
GB/T 19000, GB/T 19080 and GB/T 19538 and defined by the following terms and definitions apply to this document.
3.1 Sanitation standard operating procedures sanitationstandardoperatingprocedure; SSOP
To protect the quality of health products, in the product specification process to be followed by action. It includes the following ranges. contact with the product (including
Raw materials, semi-finished and finished products), or contact with the product items (including water and ice) shall comply with safety and health requirements; contact with the product and within the appliance
Packaging materials should be clean, hygienic and safe; to ensure that products from cross-contamination; ensure that operators hand cleaning and disinfection, keeping the toilet set
Shi clean; prevent lubricants, fuel, cleaning and disinfecting products, condensate and other chemical, physical and biological contaminants pose a security product
Hazards; correct labeling, storage and use of all kinds of toxic chemicals; and to ensure that products are in contact with employees' health and hygiene; prevention and cleared
In addition to rodents, pests.
3.2 Standard Operating Procedures standardoperatingprocedure; SOP
To ensure product quality, standardized products processing enterprises should comply with equipment and process operation.
3.3 Soy beanproducts
Soy or other beans as raw materials processed into products.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31115-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31115-2014
$415.00