Valid

GB/T 31053-2014Technology requirements for three-dimensional modeling of reverse engineering for mechanical products (English PDF)

机械产品逆向工程三维建模技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31053-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 22, 2014

Implementation date

October 1, 2015

Scope

GB/T 31053-2014 is the English-translated version of 机械产品逆向工程三维建模技术要求.

GB/T 31053-2014 is the Chinese standard "Technology requirements for three-dimensional modeling of reverse engineering for mechanical products".

Its scope clause reads: This standard specifies the precision mechanical products reverse engineering three-dimensional modeling of the general requirements and detailed requirements, as well as three-dimensional model of reverse engineering Publishing and assessment requirements and applications.

This standard is applicable to mechanical products reverse engineering three-dimensional modeling data measurement, processing, model reconstruction, to assess the accuracy of the model, the model release And applications. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31053-2014

National Standard of the People's Republic of China

ICS
01.100.01
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Abbreviations
  • 5 2 General requirements
  • 7 Reverse engineering three-dimensional model accuracy assessment
  • 8 Reverse Engineering and Application of three-dimensional model release
  • Annex B (informative) Reverse engineering machinery products three-dimensional modeling process in general

1 Scope

This standard specifies the precision mechanical products reverse engineering three-dimensional modeling of the general requirements and detailed requirements, as well as three-dimensional model of reverse engineering

Publishing and assessment requirements and applications.

This standard is applicable to mechanical products reverse engineering three-dimensional modeling data measurement, processing, model reconstruction, to assess the accuracy of the model, the model release

And applications.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2822-2005 standard size

GB/T 8170-2008 revised value represents about rules and limit values and judgment

GB/T 18784 CAD/CAM data quality

GB/T 24734.1 Technical product documentation - Digital product definition data practices - Part 1. Terms and definitions

GB/T 26099.1-2010 Part 1 General rules for three-dimensional modeling of mechanical products. General requirements

Part 2 GB/T 26099.2-2010 three-dimensional modeling of mechanical products general rules. Part Modeling

3 Terms and Definitions

GB/T 24734.1 and GB/T 26099.1-2010 and as defined in the following terms and definitions apply to this document.

3.1 Reverse engineering

Product physical measurements, fitting, edit and reconstruction and a series of analysis methods and techniques.

3.2 Three-dimensional modeling reverse engineering

Build process three-dimensional model based on the physical product.

3.3 Measurements datameasure

Get actual product geometry process three-dimensional coordinate values of surface points.

3.4 Data processing

Process data measurement results were specific processing, such as noise filtering, smoothing, aligned, stitched together, make up the interpolation points.

3.5 Point Cloud pointclouds

Expression of the same coordinate system goals and objectives of the spatial distribution of surface features massive set of points.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31053-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31053-2014

$205.00