GB/T 30976.2-2014Industrial control system security—Part 2: Acceptance specification (English PDF)
工业控制系统信息安全 第2部分：验收规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30976.2-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 24, 2014
Implementation date
February 1, 2015
Scope
GB/T 30976.2-2014 is the English-translated version of 工业控制系统信息安全 第2部分：验收规范.
GB/T 30976.2-2014 is the Chinese standard "Industrial control system security—Part 2: Acceptance specification". Its scope clause reads: GB/T 30976 provisions of this part of the security of industrial control systems for information security solutions for acceptance processes, measurement Test content, methods and requirements to be met.
The program can improve its security by adding devices or systems. The contents of this section may be used as practice guidance applicable to the petroleum, chemical, electric power, nuclear facilities, transportation, metallurgy, water treatment, Manufacturing and other control systems and equipment used in industry.
Found what you need?
Document preview — GB/T 30976.2-2014
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Overview
- 4.1 Acceptance of the basic principles of
- 4.2 Acceptance Scheme
- 4.3 Acceptance test schedule
- 4.4 Acceptance of forms of work
- 5 Acceptance preparation stage
- 5.1 Acceptance determine the objectives and scope
- 5.2 Document Preparation
- 6 Risk Analysis and disposal phase
- 6.1 Risk Analysis System
- 6.2 risk management program
- 7 Capacity validation phase
- 7.1 Equipment requirements
- 7.2 System Test
- 7.3 Acceptance Conclusion
- Appendix A (informative) Acceptance inspection table
- Annex B (informative) Acceptance conclusions
- Annex C (informative) Acceptance does not meet the entry table
- References
1 Scope
GB/T 30976 provisions of this part of the security of industrial control systems for information security solutions for acceptance processes, measurement
Test content, methods and requirements to be met. The program can improve its security by adding devices or systems.
The contents of this section may be used as practice guidance applicable to the petroleum, chemical, electric power, nuclear facilities, transportation, metallurgy, water treatment,
Manufacturing and other control systems and equipment used in industry.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test A. Cold (IEC 60068-2-
1.2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test B. Dry heat (IEC 60068-2-
2.2007, IDT)
GB 3836.1 explosive atmospheres - Part 1. General requirements Equipment (GB 3836.1-2010, IEC 60079-0.2007,
MOD)
GB 3836.2 explosive atmospheres - Part 2. the flameproof enclosure "d" protection devices (GB 3836.2-2010, IEC 60079-
1.2007, MOD)
GB 3836.4 explosive atmospheres - Part 4. the intrinsically safe "i" Device Protection (GB 3836.4-2010, IEC 60079-
11.2006, MOD)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment Part 1. General requirements (IEC 61010-
1.2001, IDT)
GB/T 15153.1-1998 Telecontrol equipment and systems Part 2. Operating conditions Section 1. Power supply and electromagnetic compatibility (IEC 60870-2-1.1995, IDT)
GB/T 15153.2-2000 Telecontrol equipment and systems Part 2. Operating conditions Part 2. Environmental conditions (climatic, mechanical and
Other non-electrical influences) (IEC 606870-2-2.1996, IDT)
GB/T 18018-2007 Information technology security router security technical requirements
Electrical equipment EMC requirements - Part GB/T 18268.1-2010 measurement, control and laboratory use 1. General requirements (IEC 61326-1.2005, IDT)
Evaluation of GB/T 18272.4-2006 industrial process measurement and control system evaluation of system properties - Part 4. System performance
Assessment (IEC 61069-4.1997, IDT)
GB/T 25068.3-2010 Information technology - Security techniques - IT network security - Part 3. Use the security gateway Wangjiantongxin
Security (ISO /IEC 18028-3.2005, IDT)
GB/T 25069-2010 Information security technology terms
GB/T 30976.1-2014 information security in industrial control systems - Part 1. Specification for the assessment […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30976.2-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 30976.1-2014 — Industrial control system security—Part 1: Assessment specification
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 30976.2-2014
$295.00