GB/T 30967-2014Practice for fiber reinforcement orientation codes for composite materials (English PDF)
复合材料纤维增强体取向编码方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30967-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 24, 2014
Implementation date
January 1, 2015
Scope
GB/T 30967-2014 is the English-translated version of 复合材料纤维增强体取向编码方法.
GB/T 30967-2014 is the Chinese standard "Practice for fiber reinforcement orientation codes for composite materials".
Its scope clause reads: This standard specifies the reference coordinate system is a fiber-reinforced composite body oriented coding method, laminate reinforcements oriented coding, knitted by Strong body alignment and simplify coding orientation coding method for a computer system.
This standard applies to two-dimensional laminates and braid reinforced body oriented coding, coding orientation also applies to continuous filament wound material.
Its clauses include reference coordinate system; laminate reinforcement fibers oriented coding.
Found what you need?
Document preview — GB/T 30967-2014
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the reference coordinate system is a fiber-reinforced composite body oriented coding method, laminate reinforcements oriented coding, knitted by
Strong body alignment and simplify coding orientation coding method for a computer system.
This standard applies to two-dimensional laminates and braid reinforced body oriented coding, coding orientation also applies to continuous filament wound material.
2 reference coordinate system
2.1
laminate reinforcements oriented coding should first select the reference plane. For laminate reinforcements oriented coding, reference plane generally choose Laminates
Bottom or top. It was in the face of said laminated board using the bottom or top as a reference plane orientation encode the same. Reference surface layer of decision
Plywood reference Z-axis coordinate system or third axis.
2.2
reference plane coordinate axis direction (0 ° direction) may be needed to determine the general direction of the main fiber axis as the reference coordinate system direction.
3 laminate reinforcement fibers oriented coding
3.1
fiber reinforced laminate orientation encoded form of directions and the number of layers is. [theta1m1b1/theta2m2b2] nsb. theta1, theta2 were laminated board
Angle of each single fiber laying direction (°); m1, m2 respectively theta1, single layers (not applicable to a monolayer) on the theta2 direction; b1, b2
Respectively theta1, theta2 material types and forms of co-direction of laying the upper plate; n is the number of repetitions in parentheses fiber ply group; s represents the geometry of the
Symmetry; b represents the type of material and form.
3.2
All layers are sequentially arranged from the reference surface of the laminate, the square brackets indicate the start and end orientation coding.
3.3
each direction relative to the reference axis alignment layer with the main fiber direction and the direction of the reference coordinate axis represents the angle of the woven fabric
The warp direction of the angle between the reference direction. It is on the shop level, in the counterclockwise direction with reference to the angle of a positive angle (right-hand rule). Angle
Interval value (-90,90], the orientation of adjacent layers have different values separated by the slash (/). Angle equal and opposite in sign adjacent
Two available "±" or " minus or plus " representation.
3.4
If two or more adjacent layers having the same orientation and material systems, with the orientation angle and the subscripts denote the number of repetitions to form
Shown, if necessary indicated Material form.
3.5
laminate contains duplicate fiber ply group oriented coding layer group by parentheses and enclosed in parentheses external standard n, s, b subscript
To simplify. You can put all formations in square brackets need to describe the outer layer of plywood, square brackets under the internal standard brackets denote fiber ply
Repeat mode group.
3.6
with the subscript b indicates that the material system, the unidirectional tape layers can be omitted under the standard, the fabric layer represented by the subscript f. If the single laminates contained
The same layer type, you can label the appropriate subscript (eg f) outside the square brackets; hybrid layer layers composed of different materials plywood code should be different
On a separate label single subscript. Correspondence between the index and the material should comment after the laminate code.
3.7
When the layers of symmetrical relationship, laminates available orientation encoding lay half way and subscript s represents. Odd symmetric layer laminates, which
Oriented coding spend streaked on the surface to indicate the orientation angle. If using the subscript s, you can use the subscript T (represents the total number) to represent the
There are layers.
Except that 3.8 T means all, all the index are small letters.
Plywood layers oriented coding layer 3.9 computer representation following modifications.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30967-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30967-2014
$85.00