GB/T 30896-2014Ferrovanadium nitride (English PDF)
氮化钒铁
This is a limited preview
Buy now to download the full PDF (29 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30896-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2014
Implementation date
May 1, 2015
Scope
GB/T 30896-2014 is the English-translated version of 氮化钒铁.
GB/T 30896-2014 is the Chinese standard "Ferrovanadium nitride". Its scope clause reads: This standard specifies the technical requirements vanadium nitride iron, test methods, inspection rules, packaging, labeling, transportation, storage and certification of a General provisions.
This standard applies to steel, cast as an alloying additive to SHS and other technology, the vanadium nitride iron. Its clauses include technical requirements.
Found what you need?
Document preview — GB/T 30896-2014
National Standard of the People's Republic of China
- ICS
- 77.100
- Classification
- H 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Technical requirements1
- 4 Test Method2
- 5 Inspection Rules3
- 6 packaging, labeling, storage, transport and quality certificates3
- Appendix A (normative) ferrovanadium nitride vanadium content - The ammonium ferrous sulfate volumetric method4
- Annex C (normative) ferrovanadium nitride, carbon content - Infrared absorption method11
- Annex D (normative) vanadium nitride iron sulfur content infrared absorption method14
- Appendix H (informative) ferrovanadium nitride oxygen content infrared absorption method28
- Annex I (normative) ferrovanadium nitride silicon content - sulfuric acid dehydration gravimetric method32
1 Scope
This standard specifies the technical requirements vanadium nitride iron, test methods, inspection rules, packaging, labeling, transportation, storage and certification of a
General provisions.
This standard applies to steel, cast as an alloying additive to SHS and other technology, the vanadium nitride iron.
2 Normative references
The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document.
For undated references, the latest edition (including any amendments) applies to this document.
General provisions GB/T 3650 inspection, packing, storage and transportation, marking and certification of
GB/T 4010 alloy chemical analysis and preparation of samples
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 8170 Revised figures indicate about the rules and limit values and judgment
Sampling and testing methods GB/T 13247 ferroalloy product particle size
GB/T 20567 vanadium nitride
3 Technical requirements
3.1 Grades and chemical composition
3.1.1
different vanadium iron vanadium nitride, nitrogen and impurities is divided into six grades, chemical composition shall comply with the requirements in Table 1.
Table 1 Grades and chemical composition
Trademark
Chemical composition (mass fraction) /%
VN C Si PS Al Mn
VN ratio (N/V)
FeV45N10-A 43.0 ~ 47.0 9.0 ~ 12.0 0.50 3.00 0.09 0.05 2.50 -
FeV45N10-B 43.0 ~ 47.0 9.0 ~ 12.0 3.00 2.50 0.10 0.06 2.00 -
FeV55N11-A 53.0 ~ 57.0 10.0 ~ 13.0 0.50 2.50 0.07 0.05 2.00 -
FeV55N11-B 53.0 ~ 57.0 10.0 ~ 13.0 3.00 2.50 0.08 0.06 2.00 -
FeV65N13-A 63.0 ~ 67.0 11.0 ~ 15.0 0.40 1.50 0.06 0.05 2.00 0.50
FeV65N13-B 63.0 ~ 67.0 11.0 ~ 15.0 3.00 1.50 0.08 0.06 2.00 0.50
0.2
Note 1. VN ratio is the mass ratio.
Note 2. the balance being Fe.
3.1.2
For parties have requested, the supplier shall provide the oxygen content of the test results.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30896-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30896-2014
$505.00