GB/T 30886-2014Annular shaft kiln (English PDF)
环形套筒窑
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30886-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2014
Implementation date
January 1, 2015
Scope
GB/T 30886-2014 is the English-translated version of 环形套筒窑.
GB/T 30886-2014 is the Chinese standard "Annular shaft kiln". Its scope clause reads: This standard specifies the terms and definitions with the annular sleeve lime kiln production, classification and marking, requirements, test methods, test rules, marks, Packing and shipping.
This standard applies to not more than 1000m above sea level and the daily production of 150t ~ 800t annular sleeve kiln, altitude higher than 1000m annulus kilns can be implemented by reference.
Found what you need?
Document preview — GB/T 30886-2014
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- Q 99
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 5 requires3
- 6 Test methods9
- 7 Inspection rules13
- 8 signs, packaging, transport16
- Annex B (informative) raw materials and fuels19
1 Scope
This standard specifies the terms and definitions with the annular sleeve lime kiln production, classification and marking, requirements, test methods, test rules, marks,
Packing and shipping.
This standard applies to not more than 1000m above sea level and the daily production of 150t ~ 800t annular sleeve kiln, altitude higher than
1000m annulus kilns can be implemented by reference.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 151-1999 shell and tube heat exchangers
GB/T 1955-2008 Construction hoist
GB/T 3286.8 limestone, dolomite Determination Methods for chemical analysis of loss on ignition
GB/T 6719 baghouse technology requirements
GB/T 8923.1-2011 steel substrates before application of paints and Visual assessment of surface cleanliness - Part 1. uncoated
Steel surface and the overall removal Rust grades and grade of steel surface coating after the original
GB 12348-2008 industrial enterprises of environmental noise emission standard plant boundary
GB/T 13306 signs
GB/T 15545 monolithic refractories packaging, labeling, transportation and storage
GB 16297-1996 Integrated Emission Standard of Air Pollutants
GB/T 16546, shaped refractory products packaging, labeling, transportation and storage
Low voltage power distribution design specifications GB 50054-2011
Grounding design specifications GB/T 50065 AC electrical installations
GB 50169 electric equipment installation engineering construction and acceptance of grounding devices
GB 50185-2010 Construction Quality of industrial equipment and pipeline insulation engineering acceptance
Steel Engineering Construction Quality Acceptance GB 50205-2001
GB 50211-2004 industrial furnace masonry construction and acceptance
GB 50231 mechanical equipment installation construction and acceptance of universal norms
GB 50235-2010 for construction of industrial metal pipeline engineering
GB 50254 electrical low-voltage electrical equipment installation engineering construction and acceptance
GB 50316-2000 Code for design of industrial metallic piping
GB 50343-2012 building electronic information system lightning protection technical specifications
GB 50661 Steel Welding Code
HG/T 20700-2000 PLC systems engineering design requirements
JB/T 4357-2008 industrial boiler centrifugal induced draft fan
JB/T 8471 baghouse technical requirements for installation and acceptance
JB/T 8532-2008 pulse jet bag filter class […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30886-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30886-2014
$295.00