GB/T 30803-2014Thermal insulation products for building applications -- Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material (English PDF)

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This Standard uses translation method to make it identical with ISO 29804.2009

Thermal insulation products for building applications - Determination of the

tensile bond strength of the adhesive and of the base coat to the thermal

insulation material.

This Standard was proposed by China Building Materials Federation.

This Standard shall be under the jurisdiction of National Technical Committee

on Insulation Material of Standardization Administration of China (SAC/TC 191).

The drafting organizations of this Standard. Nanjing Glass Fiber Research &

Design Institute Co., Ltd., National Glass Fiber Products Quality Supervision

and Inspection Center.

Main drafters of this Standard. Fang Yunwei, Hao Zhengtao, Ma Dan, Xu Qi,

Chen Jianming, Huang Ying, Cui Jun, Xu Min, Li Junguang.

Thermal insulation products for building applications -

Determination of the tensile bond strength of the

adhesive and of the base coat to the thermal

insulation material

1 Scope

This Standard specifies equipment and procedures for determining the tensile

bond strength of the adhesive and of the base coat to the thermal insulation

material.

2 Normative references

The following referenced documents are indispensable for the application of

this document. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any

amendments) applies.

ISO 3251 Paints, varnishes and plastics - Determination of non-volatile

matter content

ISO 3451-1 Plastics - Determination of ash - Part 1. General methods

ISO 9229 Thermal insulation - Vocabulary

ISO 29466 Thermal insulating products for building applications -

Determination of thickness

ISO 29470 Thermal insulating products for building applications -

Determination of the apparent density

ISO 29765 Thermal insulating products for building applications -

Determination of tensile strength perpendicular to faces

EN 13499 Thermal insulation products for buildings - External thermal

insulation composite systems (ETICS) based on expanded polystyrene -

Specification

in the laboratory, but need not be recorded in the report.

d) test results.

1) all individual values and the mean value of the tensile bond strength;

2) a description of the mode of failures.

......