Valid

GB/T 30796-2014The test method for safety of food detergents - Determination of formaldehyde content (English PDF)

食品用洗涤剂试验方法 甲醛的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30796-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 8, 2014

Implementation date

November 1, 2014

Scope

GB/T 30796-2014 is the English-translated version of 食品用洗涤剂试验方法 甲醛的测定.

GB/T 30796-2014 is the Chinese standard "The test method for safety of food detergents - Determination of formaldehyde content". Its scope clause reads: This standard specifies the test methods for food formaldehyde content was determined by detergents.

This standard applies to food Determination of formaldehyde content in detergents, the detergent is also suitable for the determination of formaldehyde content in the non-food use.

If the Detergents there formaldehyde donor, the measurement result is the total formaldehyde content that may be generated. The detection limit of quantitation of the assay was 0.7µg, the lowest limit of quantification was 3µg.

When weigh 1g sample test, its methods of detection limit Was 0.7µg/g, the lowest limit of quantification was 3µg/g. Its clauses include limited test.

Found what you need?

Document preview — GB/T 30796-2014

National Standard of the People's Republic of China

ICS
71.100.40
Classification
Y 40

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Limited Test
  • 3.1 Principle
  • 3.2 Reagents
  • 3.3 Determination

1 Scope

This standard specifies the test methods for food formaldehyde content was determined by detergents.

This standard applies to food Determination of formaldehyde content in detergents, the detergent is also suitable for the determination of formaldehyde content in the non-food use. If the

Detergents there formaldehyde donor, the measurement result is the total formaldehyde content that may be generated.

The detection limit of quantitation of the assay was 0.7µg, the lowest limit of quantification was 3µg. When weigh 1g sample test, its methods of detection limit

Was 0.7µg/g, the lowest limit of quantification was 3µg/g.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

Laboratory use specifications and test methods GB/T 6682 Analysis

Preparation QB/T 2739 Test Methods commonly used detergent titration analysis (volumetric analysis) with the test solution

3 Limited Test

3.1 Principle

In sulfuric acid, sodium sulfite and formaldehyde magenta and generated a colorless compound, followed by loss of carbon atoms bonded sulfonic acid group points

Quinone compound to form a sub-type structure, so that Schiff reagent (magenta Schiff's reagent or reagents) to pink or purple.

3.2 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical reagents and GB/T 6682 provisions tertiary water.

3.2.1

magenta.

3.2.2

heptahydrate sodium sulfite.

3.2.3

hydrochloric acid, density d = 1.19.

3.2.4

sulfuric acid, c (H2SO4) = 1mol/L, amount of 60mL of concentrated sulfuric acid, with stirring slowly into 1000mL of water, cold

However, shake.

3.2.5

Schiff reagent (magenta Schiff's reagent or reagents), weighed 100mg magenta beaker, adding hot water 75mL80 °C, solution, solution. After cooling, 2.5g of sodium sulfite heptahydrate in hydrochloric acid and 4mL (3.2.3), diluted to 100mL, transferred to a brown bottle placed over night. This solution shelf life is generally two weeks should be used as a colorless.

3.3 Determination

Weigh 2g sample (weighing accuracy 0.001g) in 10mL beaker, add 2 drops of sulfuric acid (3.2.4) and 2mL Schiff reagent (3.2.5), shake […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30796-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30796-2014

$105.00