GB/T 30719-2014Liquid hydrogen land vehicle fueling system interface (English PDF)

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This Standard uses translation method to make it identical with ISO 13984.1999

Liquid hydrogen - Land vehicle fueling system interface.

This Standard was proposed by and shall be under the jurisdiction of National

Technical Committee on Hydrogen Energy of Standardization Administration of

China (SAC/TC 309).

The drafting organizations of this Standard. Tongji University, China National

Institute of Standardization, Shanghai Shunhua New Energy System Co., Ltd.,

Tsinghua University, Zhejiang University.

Main drafters of this Standard. Ma Jianxin, Pan Xiangmin, Wang Geng, Liu

Shaojun, Li Yan, Wang Cheng, Xu Ping, Ou Kesheng.

Liquid hydrogen land vehicle fueling system interface

1 Scope

This Standard specifies the characteristics of liquid hydrogen refueling and

dispensing systems on land vehicles of all types.

This Standard is applicable to the design and installation of liquid hydrogen (LH2)

fueling and dispensing systems.

2 Normative references

The following referenced documents are indispensable for the application of

this document. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any

amendments) applies.

ISO 1106-3 Recommended practice for radiographic examination of fusion

welded joints - Part 3. Fusion welded circumferential joints in steel pipes of

up to 50 mm wall thickness.

ISO 1182 Reaction to fire tests for building products - Non-combustibility

test.

ISO 9303 Seamless and welded (except submerged arc-welded) steel

tubes for pressure purposes - Full peripheral ultrasonic testing for the

detection of longitudinal imperfections.

ISO 10286 Gas cylinders - Terminology.

ISO 11484 Steel tubes for pressure purposes - Qualification and

certification of non-destructive testing (NDT) personnel.

ISO 12095 Seamless and welded steel tubes for pressure purposes -

Liquid penetrant testing.

ISO 13663 Welded steel tubes for pressure purposes - Ultrasonic testing

of the area adjacent to the weld seam for the detection of laminar

imperfections.

ISO 13664 Seamless and welded steel tubes for pressure purposes -

Magnetic particle inspection of the tube ends for the detection of laminar

imperfections.

......