GB/T 30708-2014Determination of the thermal resistance of low-density blanket-type mineral fiber insulation (English PDF)
低密度矿物棉毯状绝热材料热阻评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30708-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 27, 2014
Implementation date
December 1, 2014
Scope
GB/T 30708-2014 is the English-translated version of 低密度矿物棉毯状绝热材料热阻评价方法.
GB/T 30708-2014 is the Chinese standard "Determination of the thermal resistance of low-density blanket-type mineral fiber insulation".
Its scope clause reads: This standard specifies the density and thickness by selecting a specific product, measure the density and thickness, the use of protective hot plate or heat flow meter Determination Thermal conductivity, and using calculations and interpolation method to determine the density of thermal insulation blanket.
This standard applies to the density range 6.4kg/mineral blanket-like insulation material m3 ~ 48kg/m3 of. Its clauses include definitions; steps.
Found what you need?
Document preview — GB/T 30708-2014
National Standard of the People's Republic of China
- ICS
- 91.120.10
- Classification
- Q 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Definitions
- 5 Steps
1 Scope
This standard specifies the density and thickness by selecting a specific product, measure the density and thickness, the use of protective hot plate or heat flow meter Determination
Thermal conductivity, and using calculations and interpolation method to determine the density of thermal insulation blanket.
This standard applies to the density range 6.4kg/mineral blanket-like insulation material m3 ~ 48kg/m3 of.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4132 insulation materials and related terms
GB/T 5480 Test methods for mineral wool and its products
GB/T 10294 insulation steady thermal resistance and related properties - Guarded hot plate method
GB/T 10295 insulation steady thermal resistance and related properties - Heat flow meter method
3 Definitions
Terms and definitions GB/T 4132 defined apply to this document.
Principle 4
Blanket insulation material of low density, which density distribution is poor, resulting in the distribution of the thermal conductivity is not uniform. In order to evaluate such production
The thermal conductivity and thermal resistance of products, and we have a number of representative samples of the density, thickness and thermal conductivity of the test, and the fitting
The thermal conductivity of the density curve, using interpolation of its thermal conductivity and thermal resistance were evaluated.
Low-density blanket relations insulating material thermal conductivity and density of the formula (1) as follows.
lambda = a bD c/D ... (1)
Where.
lambda --- thermal conductivity of the sample, in units of watts per meter Kelvin [W/(m · K)];
--- The D sample density in kilograms per cubic meter (kg/m3);
A --- Product parameters thermal conductivity and density relation, which corresponds convection heat conduction;
b --- products thermal conductivity and density parameters of the relationship between the corresponding solid thermal conductivity;
Parameter c --- products of thermal conductivity and density relation, the corresponding thermal radiation.
5 Steps
5.1 Sampling
It should be adopted in a representative sample and the sample taken to avoid damage to the recommended 7m2 ~ 14m2 sample.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30708-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30708-2014
$85.00