GB/T 30696-2014Rigid phenolic foam (PF)—Determination of residual phenol (English PDF)
硬质酚醛泡沫制品 游离苯酚的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30696-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2014
Implementation date
March 2, 2015
Scope
GB/T 30696-2014 is the English-translated version of 硬质酚醛泡沫制品 游离苯酚的测定.
GB/T 30696-2014 is the Chinese standard "Rigid phenolic foam (PF)—Determination of residual phenol". Its scope clause reads: This standard specifies the method for determination of a rigid phenolic foam products free phenol content.
This standard applies to the use of acid-curing method and production base cured rigid phenolic foam products. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30696-2014
National Standard of the People's Republic of China
- ICS
- 91.120.10
- Classification
- Q 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Article rigid phenolic foam (PF) rigidphenolicfoam (PF)
- 3.2 Internal standard
- 3.3 Mass ratio
- 3.4 Peak area ratio
- 3.5 Response factor
- 3.6 Retention time
1 Scope
This standard specifies the method for determination of a rigid phenolic foam products free phenol content.
This standard applies to the use of acid-curing method and production base cured rigid phenolic foam products.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 20974 rigid phenolic foam insulation products (PF)
ISO 8974.2002 Plastics - Phenolic gas chromatographic determination of the residual content of phenol resin (Plastics-Phenolicresins-
Determinationofresidualphenolcontentbygaschromatography)
3 Terms and Definitions
GB/T 20974 and ISO 8974 define the following terms and definitions apply to this document.
3.1 Article rigid phenolic foam (PF) rigidphenolicfoam (PF)
From phenol and formaldehyde polycondensate (e.g. phenol resin) mixed with other additives such as curing agents, blowing agents, surfactants and fillers
Made of porous rigid foam.
3.2 Internal standard
Was added to the test solution for determination of phenol in response to a known quality factor of the pure substance.
3.3 Mass ratio
Phenol ratio of quality and quality of the internal standard solution to be measured.
3.4 Peak area ratio
Phenol ratio of the peak area of the internal standard peak area.
3.5 Response factor
The mass ratio of phenol and phenol internal standard and the internal standard peak area ratio ratio, according to equation (1) calculations.
K =
Mass ratio
Peak area ratio
...(1)
3.6 Retention time
The ingredients in the specified time component symmetrical peak maximum required from the injection start to appear.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30696-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30696-2014
$85.00