GB/T 30548-2014Verification method of anthropometric data in clothing field—Obtained by using 3D measurement instrument (English PDF)
服装用人体数据验证方法 用三维测量仪获取的数据
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30548-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 6, 2014
Implementation date
March 1, 2015
Scope
GB/T 30548-2014 is the English-translated version of 服装用人体数据验证方法 用三维测量仪获取的数据.
GB/T 30548-2014 lays down a method for verifying anthropometric body data used in the clothing field when that data has been captured with a three-dimensional measuring instrument.
Clause 1 states that it applies to the validation of body data obtained by three-dimensional measuring instrument for all categories of clothing.
Clause 3 fixes the vocabulary it works with: grade difference, the values between the successive data series of a clothing size system; automatic data, the data produced by the three-dimensional instrument; manual data, the data taken with a tape measure or a Martin anthropometer; and measurement in the same place, readings taken from the same sample by instrument and by hand at the same place and time.
Clause 4 sets out the principle: samples are measured both automatically and manually in the same place on the basis of GB/T 1335 and GB/T 16160, the automatic readings are compared with the manual ones, the manual readings serve as the reference and the grade difference range as the criterion, the results are treated by mathematical statistics, and the reliability of the three-dimensional measuring equipment and the usability of its data are then assessed overall.
Its normative references are GB/T 1335 (all parts) on clothing sizes, GB/T 15557 on clothing terminology, GB/T 16160 on garment measuring points and anthropometric methods, and GB/T 23698 on general requirements for three-dimensional body measurement.
The standard was proposed by the China Textile Industry Association and is administered by the National Garment Standardization Technical Committee (SAC/TC219), with Soochow University and the Shanghai Garment Research Institute among the drafting organisations.
It carries ICS 61.020 and Chinese classification Y75, and is estimated at some 9,960 words. It was issued on 6 May 2014 and has applied since 1 March 2015.
Found what you need?
Document preview — GB/T 30548-2014
National Standard of the People's Republic of China
- ICS
- 61.020
- Classification
- Y 75
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association.
1 Scope
This standard specifies the authentication method using three-dimensional measuring instrument acquired clothing human data.
This standard applies to all types of clothing with a three-dimensional measuring instrument acquired by human data validation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1335 (all parts) type of clothes
GB/T 15557 Clothing term
GB/T 16160 clothing parts and anthropometric methods
GB/T 23698 three dimensional measurement of body general requirements
3 Terms and Definitions
GB/T 15557, GB/T 16160 and defined by the following terms and definitions apply to this document.
3.1 grade difference
Values of the respective sub-file data series in the type of clothes.
3.2 Automatic Data
Dimensional measuring instrument using the data obtained.
3.3 Manual data
Use a soft foot, Martin meter data obtained.
3.4 measuring in the same place
Use the same sample data dimensional measuring instrument with a soft foot or Martin instrument obtained in the same place and time.
4 Principle
Predetermined GB/T 1335 and GB/T 16160 is based on the use of automated and manual collection of samples with field data, and automatic data Manual data for comparison. In manual data as a reference standard differential file into data range as the determination condition, the application of mathematical statistics Data were analyzed and verified, and then the three-dimensional aspects of measuring equipment reliability and data availability and other comprehensive evaluation.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30548-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1335.1-2008 — Standard sizing systems for garments - Men
GB/T 1335.2-2008 — Standard sizing systems for garments - Women
GB/T 1335.3-2009 — Standard sizing systems for garments - Children
Secure payment via Stripe
Payments accepted
GB/T 30548-2014
$145.00