Valid

GB/T 30505-2014Measure method for emission pollutants of exhaust gas of marine incinerator (English PDF)

船用焚烧炉烟气排放测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30505-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 13, 2013

Implementation date

June 1, 2014

Scope

GB/T 30505-2014 is the English-translated version of 船用焚烧炉烟气排放测量方法.

GB/T 30505-2014 is the Chinese standard "Measure method for emission pollutants of exhaust gas of marine incinerator". Its scope clause reads: This standard specifies the marine incinerator (the incinerator) emissions from flue gas measurement bench test conditions and instrumentation, measurement methods and measuring Calculation results.

This standard applies to the heat capacity of pollutants (CO, NOx, SO2 and dust) in the following 1500kW incinerator flue gas emission concentration Degree of blackness and combustion oxygen (O2) concentration bench measurements, reference measurements on board use. Its clauses include measurement conditions and instrument.

Found what you need?

Document preview — GB/T 30505-2014

National Standard of the People's Republic of China

ICS: 47.020.20
Classification: U 41

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 measurement conditions and instrument
3.1 Measurement Condition
3.2 Measuring Instruments
4 Measurement
4.1 Measuring time
4.2 sampling requirements
4.3 Before test preparation
4.4 Measurement Process
5 measurements to calculate
Appendix A (informative) incinerator emissions measurement result recording table (solid waste incineration mode)
Annex B (informative) incinerator emissions measurement results are reported in Table (waste oil burning mode)
Annex C (informative) General combustion gas (smoke) physical properties

1 Scope

This standard specifies the marine incinerator (the incinerator) emissions from flue gas measurement bench test conditions and instrumentation, measurement methods and measuring

Calculation results.

This standard applies to the heat capacity of pollutants (CO, NOx, SO2 and dust) in the following 1500kW incinerator flue gas emission concentration

Degree of blackness and combustion oxygen (O2) concentration bench measurements, reference measurements on board use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 5468 Smoke and Dust Test Methods

GB/T 10836-2008 shipbuilding and marine technology Marine Incinerator Requirements

Determination of UV HJ/T 42 Stationary source emission of nitrogen oxides spectrophotometry

HJ/T 43 Stationary source emission-Determination of nitrogen oxides hydrochloride naphthylethylenediamine spectrophotometry

Determination of HJ/T 44 stationary sources of carbon monoxide in the exhaust gas non-dispersive infrared absorption method

Determination of HJ/T 57 stationary source emission of sulfur dioxide constant potential electrolysis

ISO 8217 Petroleum products - Fuels (F grade) bunker fuel requirements

IMOMPEC.76 (40) standard technical requirements for shipboard incinerators

3 measurement conditions and instrument

3.1 Measurement conditions

3.1.1 Test conditions

3.1.1.1

incinerator waste oil testing according to GB/T 10836-2008 specified in Appendix A.5 waste oil.

a) 75% heavy fuel oil residue;

b) 5% waste lubricating oil;

c) 20% emulsified water.

3.1.1.2

testing waste incinerator according to GB/T 10836-2008 specified in Appendix A.5 solid waste (IMO02 grade).

a) 50% of food waste;

b) 50% refuse, including.

1) 30% of waste paper;

2) 40% of cardboard, wood and so on;

3) 10% rag;

4) 20% plastic.

Solid waste should be above 50% and a water content of 7% incombustible solids.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

GB/T 11038-2026|GB/T 25017-2026|GB/T 25018-2026|GB/T 47317-2026|GB/T 47707-2026|GB/T 47709-2026

How to Download GB/T 30505-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.