GB/T 30476-2013Woodworking machines - Single chain mortising machines - Nomenclature and acceptance conditions (English PDF)
木工机床 链式单轴榫槽机 术语和精度
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30476-2013 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
October 1, 2014
Scope
GB/T 30476-2013 is the English-translated version of 木工机床 链式单轴榫槽机 术语和精度.
GB/T 30476-2013 - This standard specifies the terms of each part of the chain uniaxial tenon slot machine (hereinafter referred to as machine tools), while referring to ISO 230-1:1996, defines the machine Geometric precision test bed, and given the appropriate tolerances for general use, general precision machine tools.
This standard only requires that the machine accuracy test, does not apply to running test machine (such as vibration, unusual noise, reptiles and other parts of the seized Experience), does not apply to machine features test (such as speed, feed rate, etc.), these tests are generally advised to test for accuracy in front of the machine.
Found what you need?
Document preview — GB/T 30476-2013
National Standard of the People's Republic of China
- ICS
- 79.120.10
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Short Description
- 4 Terms
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses the translation method identical with ISO 7950. 1985 "Chain uniaxial woodworking machines Tenon slot machines Nomenclature and acceptance conditions" (English Chinese Version).
Consistency correspondence with international standards in this standard references of our standards are as follows.
--- GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines (EqvISO 230-1.1996) for ease of use, this standard made the following editorial changes.
Chapter 2 International Standard ISO/R230 to the official version of the International Standard ISO 230-1.
The standard proposed by China Machinery Industry Federation.
This standard by the National Woodworking Machine and Tool Standardization Technical Committee (SAC/TC84) centralized.
This standard drafting unit. Woodworking Machine Tool Research Institute, Fuzhou, Weihai City Product Quality Supervision, Inspection, Minhou County Cheung Woodworking Machinery Factory, Jinhua City-Acer Co. furniture, Linhai City, Chau Machinery Co., Ltd., Guangdong Rui Asia Machinery Co., Ltd. Shaowu Zhenda Machinery Manufacturing has Limited liability company, Nantong country-wide Woodworking Machinery Manufacturing Co., Ltd.
Drafters of this standard. Zheng Li, Juhong Xiang, Lin Wenxin Chen Yun root, Fan Qingping, Zhou Hua standard, Yang Hua, Liwen Xiao, Chen Guoquan.
Woodworking machines uniaxial chain mortise machine Nomenclature and
1 Scope
This standard specifies the terms of each part of the chain uniaxial tenon slot machine (hereinafter referred to as machine tools), while referring to ISO 230-1:1996, defines the machine Geometric precision test bed, and given the appropriate tolerances for general use, general precision machine tools.
This standard only requires that the machine accuracy test, does not apply to running test machine (such as vibration, unusual noise, reptiles and other parts of the seized Experience), does not apply to machine features test (such as speed, feed rate, etc.), these tests are generally advised to test for accuracy in front of the machine.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 230-1:1996 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines
3 Short Description
3.1 standard in all dimensions and tolerances are in millimeters.
3.2 This standard should be used with reference to ISO 230-1:1996, in particular the temperature rise test before the installation of the machine spindle and other moving parts, in order to and test methods. Gage error should not exceed 1/3 of the tolerance of the subject project.
3.3 standard geometric accuracy test order is given by the machine tool assembly sequence, which is not limited by the order of the actual inspection time. In order to facilitate Installation and testing of the seizure, inspection in any order.
3.4 Test Project selection is determined by the user, and in agreement with the manufacturer, clearly defined at the time of ordering the machine.
3.5 movement in the direction of the workpiece called longitudinal movement.
3.6 When determining the minimum conversion time measuring range is different tolerances specified in this standard on measuring range should be considered tolerance is 0.01 mm (see ISO 230-1:1996 in 2.311).
4 Terms
Tools - Terminology Figure 1 and Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 230
How to Download GB/T 30476-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30476-2013
$165.00