GB/T 30432-2013Liquid-medium piston pressure gauge (English PDF)
液体活塞式压力计
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30432-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
August 1, 2014
Scope
GB/T 30432-2013 is the English-translated version of 液体活塞式压力计.
GB/T 30432-2013 is the Chinese standard "Liquid-medium piston pressure gauge". Its scope clause reads: This standard specifies the basic parameters, technical requirements, test methods, inspection rules of liquid piston gauge, logos, packaging and storage Claim.
This standard applies to direct or by applying a load bearing means (lever) on the piston, the working medium is a liquid piston gauge (hereinafter Referred gauge).
This standard applies to the measurement limit of 250MPa or less (including 250MPa) pressure gauge. Its clauses include basic parameters.
Found what you need?
Document preview — GB/T 30432-2013
National Standard of the People's Republic of China
- ICS
- 17.100
- Classification
- N 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 basic parameters
- 4 2 Technical Requirements
- 6 Inspection rules
- 7 signs, packaging and storage
- Appendix A (normative) Test sequence
- Annex C (normative) mass formula
- Annex D (informative) test instruments
- Annex E (informative) gravity of 16 major cities
1 Scope
This standard specifies the basic parameters, technical requirements, test methods, inspection rules of liquid piston gauge, logos, packaging and storage
Claim.
This standard applies to direct or by applying a load bearing means (lever) on the piston, the working medium is a liquid piston gauge (hereinafter
Referred gauge). This standard applies to the measurement limit of 250MPa or less (including 250MPa) pressure gauge.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 264 Petroleum products - Determination of acid number
GB/T 265 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 1146 standard foam
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 13384 mechanical and electrical products packaging General technical conditions
JB/T 9329 Instrumentation transport, transportation, storage and basic environmental conditions and test methods
3 basic parameters
Pressure gauge accuracy rating of 0.02 and 0.05, the basic parameters in Table 1 should be selected.
Table 1
Measurement limit
MPa
Nominal area of piston cm2
Piston (including bearing plate) special weight
The nominal mass kg
Generated pressure
MPa
The nominal mass kg
Generated pressure
MPa
Quantity
0.6 1 0.4 0.04
0.1 0.01 6
0.5 0.05 10
0.5 0.5 0.1
0.5 0.1 4
0.2 0.2 0.1
0.2 0.1 4
1 0.5 11
25 0.2 1 0.5
0.5 1 5 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30432-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30432-2013
$315.00